Cabinet Forge Entry and Mudroom Cabinet Program
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
Bench-height 18 in. bases handle shoes and seated storage, 33 in. bases and drawer banks carry gloves and gear, and the tall towers close coats behind doors. Combine codes to fit the wall you have; the size table lists every unit.
Highlights
- Ready-to-assemble boxes go together with cam-lock fasteners and pre-drilled joinery; plan on roughly 20 to 40 minutes per cabinet with basic hand tools.
- Bench-height 18 in. bases, 33 in. drawer bases, 84 in. coat towers, and a wall box combine into a full drop zone from eight coded units.
- Tall units must be anchored to wall framing with the included anti-tip hardware during installation.
- Program finishes are confirmed during quote review; renders are representative of the woodgrain program.
Specification Table
| Product Type | Entry and mudroom cabinet program |
| Units | 8 coded units |
| Heights | 18, 33, and 84 in. |
| Depth | 15 in. |
| Widths | 15 and 18 in. |
| Assembly | Ready to assemble (RTA), cam-lock joinery |
| Anti-Tip | Wall anchoring required for 84 in. towers |
| Finish | Confirmed during quote review |
| Warranty | Confirmed during quote review |
Size Run
| Code | Width | Height | Depth | Doors | Drawers | Shelves |
|---|---|---|---|---|---|---|
| EB181815 | 18 in. | 18 in. | 15 in. | 1 | 0 | 1 |
| EB183315 | 18 in. | 33 in. | 15 in. | 1 | 1 | 1 |
| EBD181815 | 18 in. | 18 in. | 15 in. | 0 | 2 | 0 |
| EBD183315 | 18 in. | 33 in. | 15 in. | 0 | 3 | 0 |
| EBS181815 | 18 in. | 18 in. | 15 in. | 0 | 0 | 1 |
| EC1515 | 15 in. | 84 in. | 15 in. | 2 | 0 | 4 |
| EC1815 | 18 in. | 84 in. | 15 in. | 2 | 0 | 4 |
| EW181815 | 18 in. | 18 in. | 15 in. | 0 | 0 | 0 |
What Is Included
- Cabinet panels, doors, drawers, and shelves per coded unit
- Cam-lock fasteners, connectors, and assembly hardware
- Anti-tip wall anchoring hardware for tall towers
Installation and Assembly Notes
- Units ship flat-packed as ready-to-assemble kits with cam-lock fasteners and pre-drilled joinery.
- Set bench-height bases level before topping with a seat board.
- Tall units must be anchored to wall framing with the included anti-tip hardware during installation.
Warranty and Support
- Warranty terms are confirmed during quote review.
- Every order is reviewed by a project specialist before production, and replacement-part requests run through the same quote channel.
Frequently Asked Questions
How hard is assembly?
Each cabinet arrives flat-packed with pre-drilled cam-lock joinery. A typical box needs a screwdriver, a rubber mallet, and roughly 20 to 40 minutes. No specialty tools are required, and hinges and glides come ready to mount.
Can the low cabinets be used as a bench?
The 18 in. tall base units are bench height and commonly topped with a seat board and cushion. Seat boards and load details are confirmed during quote review.
Do the tall entry towers need anchoring?
Yes. The 84 in. EC towers must be fastened to wall framing with the included anti-tip hardware during installation.
What finish do entry units come in?
Entry program finishes are confirmed during quote review, and renders shown are representative of the woodgrain program.
Documents
- Type Entry Cabinet
- SKU CF-CAB-ENT-PRG-EB181815
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.