Cabinet Forge Graphite Shaker Specialty Wall Cabinet Set

Every box is built from 3/4 in. UV-coated plywood on the frameless, full-access construction program, with mortise and tenon door joinery, solid wood dovetailed drawer boxes, full-extension undermount soft-close drawer glides, and concealed 6-way adjustable soft-close hinges as standard. Bridge boxes come 30 and 36 in. wide in 12 to 24 in. heights, in both 12 and 24 in. depths, so refrigerator and oven runs wrap cleanly. Corner and end units close out a run with angled or open display storage. The dark finish gives a room weight and contrast, pairing naturally with brass or matte-black hardware, pale counters, and warm wood floors. Run it wall to wall for drama, or use it on the island as an anchor color against lighter perimeter cabinets. This platform is also quoted in: White Shaker, Gray Shaker, Blue Shaker, Shadow Oak, White Oak, Natural Birch, Heritage Oak, Sage Green, Pearl White, Slim Shaker, Shaker Maple, Shaker Cherry, Red Cherry, Radish Shaker. The last five styles are quoted from the door style program and do not carry stocked photography yet.

Highlights

• Ready-to-assemble boxes go together with cam-lock fasteners and pre-drilled joinery; plan on roughly 20 to 40 minutes per cabinet with basic hand tools.
• Cabinet boxes are 3/4 in. UV-coated plywood throughout, a stiffer and more moisture-tolerant build than the particleboard boxes common at this price point.
• Deep graphite painted finish that hides everyday smudges better than pure black, with premium soft-close hinges and glides on every opening.
• Solid wood dovetailed drawer boxes ride on full-extension undermount soft-close glides, so every drawer opens fully and closes quietly.
• Frameless full-access construction eliminates the center face frame, adding usable storage and easier access versus framed equivalents.
• 24 in. deep bridge cabinets align flush over refrigerators for a built-in look without custom millwork.

Specification Table

Size Run

What Is Included

• Cabinet box panels, doors, and drawer components for the configured size
• Premium soft-close hinges and full-extension undermount drawer glides
• Cam-lock fasteners, connectors, and assembly hardware
• Adjustable shelf pins where shelves are configured

Installation and Assembly Notes

• Cabinets ship flat-packed as ready-to-assemble kits with cam-lock fasteners and pre-drilled joinery.
• Assemble each box square on a clean, flat surface before setting or hanging.
• Set and level runs from the high point of the floor, shim as needed, and fasten to wall framing through the plywood hanging rail.
• Doors and drawers need final alignment after installation; the 6-way adjustable hinges make this a screwdriver-only job.
• Wall cabinets hang from the 3/4 in. plywood hanging rail; always fasten into wall studs, never drywall alone.
• Confirm appliance clearances against the manufacturer's specification sheet before setting bridge cabinets.

Warranty and Support

• Warranty terms are confirmed during quote review.
• Every order is reviewed by a project specialist before production, and replacement-part requests run through the same quote channel.

Frequently Asked Questions

How hard is assembly?
Each cabinet arrives flat-packed with pre-drilled cam-lock joinery. A typical box needs a screwdriver, a rubber mallet, and roughly 20 to 40 minutes. No specialty tools are required, and hinges and glides come ready to mount.

How do I build a refrigerator surround?
Set a 24 in. deep bridge cabinet (W361224 through W362124 by height) above the refrigerator and flank it with tall cabinets or panels. Your quote coordinates the exact bridge height to the appliance cutout.

What is the stemware rail?
GH30 is a 30 in. wide, 1 1/2 in. tall glass holder strip that mounts under a wall cabinet to hang stemware. It matches the door style finish of the run it joins.

Can I get this cabinet in a different door style?
Yes. The program covers 15 door styles, including five styles quoted without stocked photography. Ask for any style by name during quote review and the same size run applies.

Documents

• Product Submittal Summary (PDF)
• Dimensional & Fit Reference (PDF)
• Installation & Warranty Reference (PDF)

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.