Door Axis 24 in x 80 in 6-Panel Textured Composite Hollow Core Bifold Closet Door

The Door Axis 24 in x 80 in 6-Panel Textured Composite Bifold Closet Door folds a classic raised-panel look into half the swing space of a hinged door. It serves homeowners, property managers, and remodelers finishing closets, pantries, and laundry nooks where a full door swing would collide with furniture or traffic.

The unit is a pair of 1.38 in thick hollow core composite panels hinged as one folding leaf, with molded 6-panel faces and a textured, factory primed surface that takes standard interior paint without prep beyond a light scuff. Molded composite construction resists the warping, shrinking, and cracking that moves solid lumber doors out of alignment in seasonal humidity. The overhead track, pivots, and guide hardware are included: the track screws into the head jamb of a standard 24 in finished opening, the pivots seat into top and bottom brackets, and the free edge rides a guide so the pair folds flat against the jamb. The pair is reversible, so it can fold to either side of the opening. This size is stocked as the 24 in x 80 in pair; additional sizes are quoted on request.

Highlights

• 24 in x 80 in x 1.38 in two-panel folding pair, about 26 lb
• Molded 6-panel faces with textured, factory primed paint-ready surface
• Hollow core composite resists warping, shrinking, and cracking
• Overhead track, pivots, and guide hardware included
• Folds flat against the jamb, freeing the floor a swinging door sweeps
• Universal reversible: folds to either side of the opening
• Fits a 24 in W x 80.75 in H rough opening
• Additional sizes are quoted on request

Specification Table

Included Components

• Two hinged 6-panel composite door panels, factory primed
• Overhead track with mounting screws
• Top and bottom pivots with brackets
• Guide hardware for the free edge
• Installation instructions

Installation Notes

• Verify the finished opening before ordering: the pair fits a 24 in wide by 80.75 in tall rough opening with the track at the head jamb; measure width at top, middle, and bottom and use the smallest figure.
• Fasten the overhead track into the head jamb framing, not drywall alone, and set the bottom pivot bracket plumb below the top pivot so the pair hangs square.
• Adjust the pivot heights so the panels clear the finished floor evenly, then set the guide so the free edge folds without rubbing the jamb.
• Seal all six edges, including top and bottom, when painting so the hollow core panels stay flat in humid rooms like laundry areas.
• Do not trim the panels to size; trimming voids the warranty. Alternate sizes are quoted on request.

Warranty and Support

• 1 year limited manufacturer-backed warranty, confirmed during quote review.
• Quote packages include hardware adjustment guidance and paint preparation notes.

Frequently Asked Questions

What opening does this bifold fit?
It is sized for a 24 in wide by 80.75 in tall rough opening, the standard single-panel closet module. Measure the finished opening at top, middle, and bottom; if your opening differs, alternate sizes are quoted on request.

Is the track hardware included?
Yes. The overhead track, top and bottom pivots with brackets, and the guide hardware for the free edge ship with the panels, along with instructions.

Can it fold to the left or the right?
Either. The pair is universal reversible: set the pivot side at the jamb you prefer during installation and the doors fold flat against that side.

Does it need painting?
The surface arrives factory primed. Apply standard interior paint after a light scuff and cleaning, and coat all edges including top and bottom to keep the panels stable.

Documents

• Product Submittal Summary (PDF)
• Dimensional & Fit Reference (PDF)
• Installation & Warranty Reference (PDF)

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.