Door Axis 24 in x 80 in Full Louver Pine Bifold Closet Door, Painted White

The Door Axis 24 in x 80 in Full Louver Pine Bifold Closet Door pairs shutter-style louvered ventilation with a furniture-grade painted white finish. It serves closets, pantries, laundry areas, and utility spaces where air needs to circulate through the door face and a swinging door would eat the floor plan.

The unit is a pair of 1 in thick solid pine panels hinged as one folding leaf, with full louver faces above and below a solid mid rail. The angled louvers pass air continuously, which keeps closets and laundry alcoves from trapping humidity and lets mechanical spaces breathe. The pine arrives factory painted white in a furniture quality finish, and the solid wood construction can be trimmed modestly for out-of-square openings, a working advantage over hollow molded doors. The overhead track, pivots, and guide hardware are included: the track screws into the head jamb, the pivots seat into top and bottom brackets, and the free edge rides a guide so the pair folds flat against the jamb. The pair is reversible and folds to either side. Two stocked sizes cover standard 24 in and 36 in closet modules; additional widths, heights, and wood-tone finishes are quoted on request.

Highlights

• Solid pine panels, 1 in thick, in a two-panel folding pair
• Full louver faces ventilate closets, pantries, and laundry alcoves
• Factory painted white, furniture quality finish
• Trimmable solid wood construction accommodates out-of-square openings
• Overhead track, pivots, and guide hardware included
• Universal reversible: folds to either side of the opening
• 24 in and 36 in x 80 in stocked; other sizes and finishes quoted on request
• 5 year limited manufacturer-backed warranty

Specification Table

Included Components

• Two hinged full louver solid pine panels, factory painted white
• Overhead track with mounting screws
• Top and bottom pivots with brackets
• Guide hardware for the free edge
• Installation instructions

Installation Notes

• Verify the finished opening before ordering: each unit fits its nominal width at an 80.688 in tall rough opening with the track at the head jamb; measure width at top, middle, and bottom and use the smallest figure.
• Fasten the overhead track into the head jamb framing, not drywall alone, and set the bottom pivot bracket plumb below the top pivot so the pair hangs square.
• Adjust the pivot heights so the panels clear the finished floor evenly, then set the guide so the free edge folds without rubbing the jamb.
• If the opening is slightly out of square, trim the solid pine edges modestly and evenly, then reseal trimmed edges with paint before hanging.
• In laundry and bath-adjacent locations, confirm the louver faces are oriented per the instructions so the slats shed toward the room face.

Warranty and Support

• 5 year limited manufacturer-backed warranty, confirmed during quote review.
• Quote packages include hardware adjustment guidance and trim-and-seal notes for fitted openings.

Frequently Asked Questions

Why choose a louvered door over a flush or panel bifold?
The full louver face passes air continuously, which keeps enclosed closets, pantries, and laundry alcoves from trapping humidity and odors, and lets water heater or mechanical closets breathe where codes call for ventilation.

Can I trim it to fit my opening?
Yes, modestly. The panels are solid pine, so the edges accept light trimming for out-of-square openings; trim evenly from both edges where possible and repaint any cut faces to reseal them.

Is the track hardware included?
Yes. The overhead track, top and bottom pivots with brackets, and the guide hardware for the free edge ship with the panels, along with instructions.

Are other sizes or wood-tone finishes available?
The 24 in and 36 in x 80 in painted white units are stocked. The platform also runs in additional widths, heights, and stain-tone finishes, which are quoted on request.

Documents

• Product Submittal Summary (PDF)
• Dimensional & Fit Reference (PDF)
• Installation & Warranty Reference (PDF)

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.