Door Axis 28 in x 80 in 1-Panel Shaker Solid Core Composite Prehung Interior Door, Primed White

The Door Axis 1-Panel Shaker Solid Core Composite Prehung Interior Door pairs a clean single flat panel with a solid, sound reducing core, factory hung on nickel finish hinges in a 4-9/16 in flat jamb. It serves bedrooms, offices, nurseries, and media rooms where a quieter door and a minimal shaker profile matter.

The slab carries smooth molded composite skins over a solid engineered core, so it swings with the substantial feel of a solid wood door while resisting the warping and seasonal movement of natural lumber, and the core mass measurably cuts room to room sound transfer compared with hollow core construction. The single flat panel with square shaker sticking works in modern, farmhouse, and transitional interiors, and the factory primed white surface is ready for finish paint in any color. Each unit ships single bored for a standard lockset at a 2-3/8 in backset, with the slab already hung square in its jamb, which removes slab fitting, hinge mortising, and bore drilling from the install.

Highlights

• Solid, sound reducing core for quieter bedrooms, offices, and media rooms
• Single flat panel shaker profile with clean square sticking
• Complete prehung unit: slab, 4-9/16 in flat jamb, and nickel finish hinges
• Smooth primed white skins, ready for finish paint
• Single lockset bore at 2-3/8 in backset, ready for standard hardware
• Composite construction resists warping, shrinking, and cracking
• Widths 24 to 36 in on an 80 in slab; taller and 34 in units quoted on request

Specification Table

Included Components

• 1-Panel shaker solid core composite slab, factory hung
• 4-9/16 in wood flat jamb (assembled frame)
• Nickel finish butt hinges, mortised and installed
• Factory lockset bore (lockset sold separately)
• Installation instructions

Installation Notes

• Verify the rough opening before ordering: plan slab width plus 1.5 to 2 in and 81.5 to 82 in of height; the 28 in x 80 in single fits a 30 in x 82 in opening.
• Set the unit plumb and level, then shim behind each hinge location and at the strike; a solid core slab will reveal a racked frame faster than a hollow one.
• Hold the slab about 1/2 in above the finished floor and increase clearance over carpet or thick flooring.
• Paint the unit and seal all six slab edges, including top and bottom, to keep the core dry and the warranty intact.
• Do not trim the slab to force an undersized opening; trimming voids the warranty, and nonstandard sizes are quoted on request.

Warranty and Support

• Limited manufacturer-backed warranty, confirmed during quote review.
• Support includes rough opening review and handing checks before release.

Frequently Asked Questions

How much quieter is solid core than hollow core?
The solid engineered core adds mass that hollow doors lack, which cuts normal conversation and TV noise transfer noticeably. It is the practical upgrade for bedrooms, offices, and media rooms without moving to an acoustic door assembly.

How do I pick Left-Hand or Right-Hand?
Stand on the side the door swings toward. Hinges on your left means Left-Hand; hinges on your right means Right-Hand.

Can I get it in a factory color instead of primed?
Yes. A factory painted program in about a dozen designer colors is quoted on request; the stocked variants ship primed white and take site-applied paint directly.

What rough opening do I need?
Plan slab width plus 1.5 to 2 in and 81.5 to 82 in of height, then confirm against your framing on site. Exact unit dimensions are confirmed during quote review.

Documents

• Product Submittal Summary (PDF)
• Dimensional & Fit Reference (PDF)
• Installation & Warranty Reference (PDF)

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.