Door Axis 30 in x 80 in 6-Panel Textured Hollow Core Composite Interior Door Slab
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
The Door Axis 6-Panel Textured Hollow Core Composite Interior Door Slab is the workhorse replacement door: a primed, paint-ready slab that hangs in an existing frame without buying a whole prehung unit. It serves landlords, flippers, and homeowners refreshing worn or damaged doors while keeping existing jambs, casings, and trim.
The slab is built from textured molded composite skins over an engineered wood frame with a hollow core, giving it the raised 6-panel colonial look of a stile and rail door at a fraction of the weight and cost, with far better resistance to warping, shrinking, and cracking than solid lumber. At about 25 lb in the 30 in size it is a one-person install: transfer the hinge locations from the old slab, mortise, and hang. Choose With Lockset Bore for a standard single bore ready to accept a lockset, or Non-Bored when matching a nonstandard bore height, backset, or specialty hardware. The factory primed white surface takes paint directly, and all six edges should be sealed after finishing.
Highlights
- Slab-only format keeps existing jambs, casings, and trim in place
- Raised 6-panel colonial profile in a textured, paint-ready primed skin
- Hollow core composite build, about 25 lb in the 30 in size
- Universal reversible: hinge and hardware edges are handed at installation
- With Lockset Bore or Non-Bored prep per size
- Composite skins resist warping, shrinking, and cracking
- Five stocked widths from 24 to 36 in on an 80 in slab
Specification Table
| Configuration | Single interior door slab, no frame or hinges |
| Slab size | 30 x 80 in flagship; widths 24, 28, 30, 32, 36 in, all 80 in tall |
| Slab thickness | 1-3/8 in (1.38 in) |
| Core and material | Hollow core, textured molded composite skins over engineered wood frame |
| Panel profile | 6-Panel colonial, raised panel look |
| Handing | Universal Reversible, handed at installation |
| Hardware prep | Single lockset bore (With Lockset Bore) or undrilled (Non-Bored); hinges and lockset sold separately |
| Frame fit | Hangs in an existing frame sized to the slab; jamb kits for new openings are quoted on request |
| Finish | Primed white, paint-ready |
| Sound reduction | No, hollow core construction |
| Weight | About 23 to 28 lb by width (25 lb at 30 in) |
| Additional sizes | Additional sizes are quoted on request |
| Warranty | Limited manufacturer-backed warranty, confirmed during quote review |
Included Components
- 6-Panel textured composite door slab only
- Factory single lockset bore on With Lockset Bore variants
- Installation instructions
- Hinges, lockset, and jamb hardware sold separately
Installation Notes
- Measure the old slab, not the opening: match width, height, and 1-3/8 in thickness, and order the slab size that matches the existing frame.
- Transfer hinge mortise locations from the old slab with the new slab clamped alongside, then rout or chisel the mortises to the same depth.
- Check the bore position against your lockset before ordering; pick Non-Bored when the existing strike height or backset is nonstandard.
- Maintain about 1/2 in of clearance above the finished floor and trim clearance only at the hardware-free edges allowed by the instructions; heavy trimming voids the warranty.
- Paint the slab and seal all six edges, including top and bottom, so the core stays dry and flat.
Warranty and Support
- Limited manufacturer-backed warranty, confirmed during quote review.
- Support includes slab sizing checks against your existing frame measurements before release.
Frequently Asked Questions
Will this slab fit my existing frame?
Measure your current door: width, height, and thickness. This slab is 1-3/8 in thick in widths 24 to 36 in at 80 in tall. If your old door matches those numbers, the slab hangs in the existing frame after hinge mortising.
Should I pick With Lockset Bore or Non-Bored?
With Lockset Bore ships with a standard single bore that fits common locksets. Pick Non-Bored when your existing strike plate sits at a nonstandard height or backset, or when using specialty hardware, and drill on site to match.
Is a slab or a prehung unit right for me?
A slab is right when the existing frame is square and sound and you want to keep the trim. If the frame is damaged or out of square, a prehung unit with a new jamb is the better repair.
Can I stain it like wood?
No. The molded composite skin is made for paint. It arrives primed white and takes latex or alkyd paint directly after a light scuff.
Documents
- Type Composite Interior Door Slab
- SKU DA-DR-INT-HC6P-SLB-3080-B
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.