Door Axis 30 in x 80 in 6-Panel Textured Hollow Core Composite Prehung Interior Door, Primed White
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
The Door Axis 6-Panel Textured Hollow Core Composite Prehung Interior Door arrives as a complete unit: a primed 6-panel slab already hung on nickel finish hinges in a 4-9/16 in wood jamb. It serves builders, remodelers, and homeowners who want a paint-ready colonial style door that drops into a standard 2x4 stud wall without slab fitting or hinge mortising.
The slab is built from textured molded composite skins over an engineered wood frame with a hollow core, so it hangs light, swings easily on standard hinges, and resists the warping, shrinking, and cracking that solid lumber shows across seasons. The raised 6-panel profile carries traditional trim detail through the whole house, and the factory primed surface takes latex or alkyd paint directly. Singles from 24 to 36 in wide ship single bored for a standard lockset at a 2-3/8 in backset; the 48 and 60 in doubles pair two slabs on one frame and ship non-bored for ball catch or surface mounted hardware. Every unit uses a 4-9/16 in jamb sized for standard interior walls, and the slab must be sealed on all six sides after painting to hold the warranty.
Highlights
- Complete prehung unit: slab, wood jamb, and nickel finish hinges factory assembled
- Textured molded composite skins resist warping, shrinking, and cracking
- Raised 6-panel colonial profile suits traditional and farmhouse interiors
- Factory primed white, ready for finish paint out of the box
- Hollow core keeps the unit light for one person handling and easy swinging
- Singles bored for a standard lockset at 2-3/8 in backset
- 4-9/16 in jamb depth fits standard 2x4 interior stud walls
- Double configurations pair two slabs on one frame for wide openings
Specification Table
| Configuration | Single prehung (24 to 36 in) or double prehung (48 to 60 in) |
| Slab size | 30 x 80 in flagship; sizes 24, 28, 30, 32, 36 in wide singles, 48 and 60 in doubles, all 80 in tall |
| Rough opening | Slab width plus 2 in, height 82 in (32 x 82 in for the 30 in single) |
| Slab thickness | 1-3/8 in (1.38 in) |
| Core and material | Hollow core, textured molded composite skins over engineered wood frame |
| Panel profile | 6-Panel colonial, raised panel look |
| Handing | Left-Hand or Right-Hand singles; Universal Reversible doubles |
| Jamb | 4-9/16 in wood jamb; split or flat jamb style confirmed during quote review |
| Hardware prep | Singles: single lockset bore, 2-3/8 in backset; doubles: non-bored |
| Hinges | Nickel finish butt hinges, factory hung |
| Finish | Primed white, paint-ready |
| Weight | About 57 lb (30 in single); about 65 lb (48 in double) |
| Additional sizes | Additional sizes are quoted on request |
| Warranty | Limited manufacturer-backed warranty, confirmed during quote review |
Included Components
- 6-Panel textured composite slab, factory hung
- 4-9/16 in wood jamb (assembled frame)
- Nickel finish butt hinges, mortised and installed
- Factory lockset bore on single configurations (lockset sold separately)
- Installation instructions
Installation Notes
- Verify the rough opening before ordering: slab width plus 2 in and 82 in height is the typical interior prehung allowance; the 30 in x 80 in single needs 32 in x 82 in.
- Set the unit plumb and level, then shim behind each hinge location and at the strike before fastening through the jamb.
- Hold the slab about 1/2 in above the finished floor, and allow more clearance where carpet or thick flooring is planned.
- Paint the unit and seal all six slab edges, including top and bottom, so moisture cannot swell the core.
- Do not trim the slab to fit an undersized opening; trimming voids the warranty, and nonstandard sizes are quoted on request.
Warranty and Support
- Limited manufacturer-backed warranty, confirmed during quote review.
- Support includes sizing checks of your rough opening list before release.
Frequently Asked Questions
What rough opening do I need?
Plan slab width plus 2 in and a height of 82 in. A 30 in x 80 in single needs about 32 in x 82 in; the 48 in double needs about 50 in x 82 in. Confirm on site before ordering.
How do I pick Left-Hand or Right-Hand?
Stand on the side the door swings toward. If the hinges are on your left, order Left-Hand; on your right, Right-Hand. Double units are reversible and are handed at installation.
Why choose prehung over a slab?
The prehung unit includes the jamb with hinges already mortised and the slab already hung square, which removes the most error-prone steps of slab fitting. Choose a slab only when reusing an existing square frame.
Is the door ready to paint?
Yes. The skins arrive factory primed white. Apply finish paint and seal all six slab edges to keep the warranty intact.
Documents
- Type Composite Prehung Interior Door
- SKU DA-DR-INT-HC6P-PH-3080-LH
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.