Door Axis 36 in x 80 in 6-Panel Steel Prehung Front Door with Brickmold
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
The Door Axis 6-Panel Steel Prehung Front Door is a complete entry unit that pairs an embossed 6-panel steel slab with a weatherstripped primed wood frame, aluminum sill, and factory-applied brickmold. It serves homeowners, remodelers, and builders who need a dependable, paint-ready front, side, or utility entry in standard 30, 32, and 36 in widths.
The slab is formed from steel over a wood-edge engineered interlocking core with grooved stiles for structural rigidity, and the lock area is reinforced so residential locksets and deadbolts mount on a solid substrate. A steel security plate in the frame backs the strike area to help resist forced entry, high performance compression weatherstripping seals the perimeter, and a rot-resistant composite bottom rail rides over the aluminum sill for long service at grade. Each unit arrives fully assembled on a primed wood frame with three nickel-finish hinges and exterior brickmold, double bored for a lockset and deadbolt, with a smooth primed white face that is ready for field paint. Inswing units are stocked left- and right-handed in all three widths, and a right-hand outswing version is offered in the 36 in width.
Highlights
- Embossed 6-panel steel slab, 1.75 in thick, over a wood-edge engineered interlocking core
- Prehung on a 4-9/16 in primed wood frame with factory-applied exterior brickmold
- Steel security plate at the frame strike area helps resist forced entry
- Reinforced lock area, double bored for lockset and deadbolt, hardware sold separately
- Compression weatherstripping, aluminum sill, and rot-resistant composite bottom rail
- Three nickel-finish hinges, hung left- or right-hand inswing; 36 in right-hand outswing offered
- Smooth primed white surface ready for paint; ENERGY STAR qualified construction
Specification Table
| Configuration | Single door, prehung with brickmold |
| Nominal slab size | 30, 32, or 36 in x 80 in |
| Slab thickness | 1.75 in |
| Unit dimensions | 37.5 in x 81.5 in overall (36 in x 80 in size) |
| Rough opening | 38.25 x 82 in (36 in); 34.25 x 82 in (32 in); 32.25 x 82 in (typical, 30 in) |
| Jamb | 4-9/16 in primed wood jamb |
| Panel profile | 6-panel embossed, smooth face |
| Core | Wood-edge engineered interlocking core with grooved stiles |
| Handing | Left-Hand Inswing, Right-Hand Inswing; Right-Hand Outswing in 36 in width |
| Hardware prep | Double bore for lockset and deadbolt; 3 nickel-finish hinges |
| Weatherstripping | Perimeter compression weatherstripping with aluminum sill and composite bottom rail |
| Finish | Primed white, paint ready |
| Weight | 100 lb (36 in x 80 in unit); smaller widths weigh proportionally less |
| Warranty | Limited lifetime manufacturer-backed warranty, confirmed during quote review |
Included Components
- Steel slab, factory hung on a primed wood frame
- Three nickel-finish hinges, factory installed
- Exterior brickmold, factory applied
- Aluminum sill with rot-resistant composite bottom rail
- Perimeter compression weatherstripping
- Double bore lockset and deadbolt prep; lockset and deadbolt sold separately
- Installation instructions
Installation Notes
- Verify the rough opening is about 2.25 in wider and 2 in taller than the nominal slab size, and check plumb, level, and square before setting the unit.
- Set the sill in a continuous bed of sealant over a sill pan, then shim at hinge and strike points so reveals stay even and the slab does not bind.
- Fasten through the hinge-side jamb into framing first, checking plumb in both planes before securing the strike side.
- Integrate the brickmold with housewrap and flashing tape and seal the exterior perimeter; do not block the sill weep path.
- Confirm handing viewed from outside, swing direction, and lockset backset before ordering; locksets are field installed.
Warranty and Support
- Limited lifetime manufacturer-backed warranty, confirmed during quote review.
- Quote packages include bore and hinge prep drawings on request.
Frequently Asked Questions
How do I confirm handing?
Stand outside facing the door. Hinges on the left with the door swinging into the home is a left-hand inswing; hinges on the right is a right-hand inswing. The 36 in width is also offered as a right-hand outswing that opens toward you.
What rough opening do I need?
Frame the opening about 2.25 in wider and 2 in taller than the nominal door size: 38.25 x 82 in for the 36 in door and 34.25 x 82 in for the 32 in door. Verify plumb and level before ordering.
Is a lockset included?
No. The slab is double bored for a standard lockset and deadbolt, which are ordered separately so you can match your hardware finish.
Can I paint it?
Yes. The slab, frame, and brickmold arrive primed white and should be finish painted on all six sides of the slab promptly after installation.
Documents
- Type Steel Entry Door
- SKU DA-DR-EXT-STL6P-PH-36LH
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.