Door Axis 36 in x 80 in 9-Lite Steel Prehung Entry Door with Brickmold, Left-Hand Inswing
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
The Door Axis 9-Lite Steel Prehung Entry Door puts a nine-pane tempered glass upper half on a galvanized steel slab with high-definition panel profiles, hung left-hand inswing on a brickmolded frame. It serves budget-focused builds and back or side entries that still need daylight, security, and an insulated core.
The slab is formed from galvanized steel that resists rust and corrosion, wrapped around a polystyrene core that insulates the opening and helps lower heating and cooling loads, with the complete unit rating a 0.34 U-factor. The upper half carries nine clear tempered lites over a two-panel base, and the primed slab, frame, and brickmold are all paint-ready so the entry finishes as one piece. Each unit ships assembled on a weatherstripped 4-9/16 in frame with three satin nickel hinges, double bored for a lockset and deadbolt, in nominal 32 and 36 in widths hung left-hand inswing.
Highlights
- 9-lite clear tempered glass upper half over high-definition 2-panel styling
- Galvanized steel skin resists rust and corrosion
- Polystyrene insulating core; 0.34 U-factor unit performance
- Prehung on a 4-9/16 in frame with primed, paint-ready brickmold
- Double bored for lockset and deadbolt, hardware sold separately
- Three satin nickel hinges, hung left-hand inswing
- Nominal 32 and 36 in widths at 80 in height
Specification Table
| Configuration | Single door, prehung with brickmold |
| Nominal slab size | 32 or 36 in x 80 in |
| Slab thickness | 1.75 in |
| Unit dimensions | 37.44 in x 81.75 in overall (36 in size) |
| Rough opening | 38.5 x 82.25 in (36 in); 34.5 x 82.25 in (typical, 32 in) |
| Jamb | 4-9/16 in jamb, primed |
| Material | Galvanized steel skin over polystyrene core |
| Glazing | 9-lite clear glass, tempered, half lite layout |
| Thermal performance | U-factor 0.34; solar heat gain coefficient 0.34 |
| Handing | Left-Hand Inswing |
| Hardware prep | Double bore for lockset and deadbolt; 3 satin nickel hinges |
| Weatherstripping | Perimeter weatherstripping |
| Finish | Primed, paint ready |
| Weight | 53.44 lb (listed shipping weight, 36 in unit) |
| Warranty | 10 year limited manufacturer-backed warranty, confirmed during quote review |
Included Components
- Galvanized steel slab with factory-glazed 9-lite tempered clear glass insert
- Prehung frame with primed brickmold
- Three satin nickel hinges, factory installed
- Perimeter weatherstripping and sill
- Double bore lockset and deadbolt prep; lockset and deadbolt sold separately
- Installation instructions
Installation Notes
- Verify the rough opening at 38.5 x 82.25 in for the 36 in unit and check plumb, level, and square before setting.
- Set the sill in sealant over a sill pan and shim at hinge and strike points so the glazed slab hangs square.
- Fasten the hinge-side jamb into framing first, then adjust the strike side for an even reveal.
- Integrate the brickmold with housewrap and flashing tape and seal the exterior perimeter, keeping the sill weep path clear.
- Prime cuts and finish paint all primed surfaces promptly after installation to maintain corrosion protection.
Warranty and Support
- 10 year limited manufacturer-backed warranty, confirmed during quote review.
- Unit performance data and prep drawings are available with the quote package.
Frequently Asked Questions
Is this door only left-hand inswing?
This platform is stocked left-hand inswing. If your opening needs a right-hand door, the quote review can route you to the matching 9-lite steel platform in the catalog.
What does the 0.34 U-factor mean?
It is the whole-unit heat transfer rate, glass included: the lower the number, the better the insulation. A glazed steel entry at 0.34 performs well for a half lite door.
Is the glass tempered?
Yes, all nine lites are tempered safety glass, factory glazed in a half lite layout.
What rough opening do I need?
Frame 38.5 x 82.25 in for the 36 in door; the 32 in door runs about 34.5 x 82.25 in, confirmed during quote review.
Documents
- Type Steel Entry Door
- SKU DA-DR-EXT-STL9L-PH36-36
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.