Door Axis 36 in x 80 in Craftsman 6-Lite Fiberglass Prehung Front Door with Brickmold

The Door Axis Craftsman 6-Lite Fiberglass Prehung Front Door sets a six-pane glazed top over flat Craftsman panels on a smooth, paint-ready fiberglass slab. It serves homeowners after a bungalow or farmhouse-style entry that brings in daylight up high while a low-maintenance skin stands up to weather and daily traffic.

The slab is molded with high-definition Craftsman profiles over an energy-saving polyurethane foam core, with engineered stiles that hold their dimensions through hot, cold, and humid seasons without cracking, warping, or splitting. The upper quarter carries six clear lites in a tempered insulated glass assembly, placed high for privacy at the sightline with light past it. Each unit arrives fully assembled on a primed wood frame with three black ball bearing hinges, factory brickmold, aluminum sill, and compression weatherstripping, double bored for a lockset and deadbolt, hung left- or right-hand inswing in the nominal 36 in x 80 in size.

Highlights

• Craftsman styling: 6-lite glazed top over flat recessed panels
• Clear tempered glass in an insulated dual pane assembly
• Smooth fiberglass skin resists cracking, warping, splitting, and denting
• Energy-saving polyurethane foam core; ENERGY STAR qualified construction
• Three black ball bearing hinges for smooth swing and long service
• Prehung on a 4-9/16 in primed wood frame with factory brickmold and aluminum sill
• Double bored for lockset and deadbolt, hardware sold separately
• Primed white face ready for field paint

Specification Table

Included Components

• Fiberglass slab with factory-glazed 6-lite clear glass insert
• Primed wood frame with factory-applied brickmold
• Three black ball bearing hinges, factory installed
• Aluminum sill and perimeter compression weatherstripping
• Double bore lockset and deadbolt prep; lockset and deadbolt sold separately

Installation Notes

• Verify the rough opening at 38.25 x 82 in and check plumb, level, and square before setting the unit.
• Set the sill in sealant over a sill pan and shim at hinge and strike points so the glazed slab hangs square.
• Fasten the hinge-side jamb into framing first, then set the strike side for an even reveal.
• Integrate the brickmold with housewrap and flashing tape and seal the exterior perimeter, keeping the sill weep path clear.
• Finish paint all primed surfaces, including slab edges, promptly after installation.

Warranty and Support

• Limited lifetime manufacturer-backed warranty, confirmed during quote review.
• Glazing and prep drawings are available with the quote package.

Frequently Asked Questions

Where does the glass sit on the door?
The six lites occupy the top quarter of the slab, above eye height for most approaches, so you get daylight in the entry with privacy at the sightline.

Is the glass insulated and tempered?
Yes. The 6-lite insert is a dual pane insulated assembly in tempered safety glass, factory glazed.

Which handing do I order?
Stand outside facing the door: hinges on the left with an inward swing is left-hand inswing, hinges on the right is right-hand inswing. Both are stocked in this platform.

Can I paint it a dark color?
The smooth primed face takes field paint well; follow the paint manufacturer guidance for dark colors on fiberglass in full sun exposures.

Documents

• Product Submittal Summary (PDF)
• Dimensional & Fit Reference (PDF)
• Installation & Warranty Reference (PDF)

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.