Door Axis 36 in x 84 in 2-Panel Plank Sandy Brown Sliding Barn Door with Track Hardware Kit
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
The Door Axis 36 in x 84 in 2-Panel Plank Sandy Brown Sliding Barn Door delivers a rustic plank-and-rail look in a factory finished composite slab with the complete matte black track kit in the box. It serves homeowners and remodelers dressing a pantry, closet, laundry, bedroom, or den opening with a farmhouse feature door that needs no site finishing.
The slab is a 1.38 in thick solid core composite door, 36 in wide by 84 in tall, faced in a Sandy Brown distressed woodgrain that reads like weathered sawn lumber. Full-width top, mid, and bottom rails divide the face into two vertical plank panels, and the pattern is built into both faces so the door presents finished from either room. The kit includes a 78.75 in matte black flat rail that mounts at 85.75 in above the floor, two top-mount roller hangers, end stops, anti-jump blocks, an adjustable floor guide, a matching pull handle, and lag fasteners with anchors for a blocked header. Factory sizing rates this slab for openings up to 32 in wide by 80 in tall, giving about 2 in of visual overlap per side. This size is stocked as the 36 in x 84 in slab; additional sizes are quoted on request.
Highlights
- 36 in x 84 in x 1.38 in solid core composite slab, about 90 lb hung weight
- Sandy Brown distressed woodgrain factory finish, no site finishing required
- Two-panel plank face with full-width rails, patterned on both sides
- Complete matte black track kit: 78.75 in flat rail, roller hangers, stops, floor guide, pull handle
- Track mounts at 85.75 in above finished floor into a blocked header
- Rated for openings up to 32 in wide x 80 in tall
- Universal reversible: slides from either side of the opening
- Additional sizes are quoted on request
Specification Table
| Configuration | Single sliding barn door slab with surface mount track hardware kit |
| Slab size | 36 in W x 84 in H x 1.38 in thick |
| Opening coverage | Up to 32 in W x 80 in H opening per factory sizing table |
| Door height rule | Door height equals opening height plus 1 in; about 1 in gap at floor |
| Core | Solid core |
| Material | Composite, factory finished Sandy Brown distressed woodgrain |
| Face profile | Two vertical plank panels split by a full-width mid rail, both faces |
| Handing | Universal reversible |
| Track length | 78.75 in (6.56 ft) flat rail |
| Track mounting height | 85.75 in above finished floor |
| Hardware finish | Matte black |
| Included hardware | Rail, two roller hangers, end stops, anti-jump blocks, floor guide, pull handle, fasteners and anchors |
| Weight | 90 lb |
| Warranty | 1 year limited manufacturer-backed warranty, confirmed during quote review |
Included Components
- 2-panel plank composite barn door slab, factory finished Sandy Brown
- Matte black flat rail, 78.75 in, with standoff spacers
- Two top-mount roller hangers with anti-jump blocks
- Rail end stops and adjustable floor guide
- Matte black pull handle
- Lag fasteners, wall anchors, and printed installation instructions
Installation Notes
- Measure the clear opening and casing before ordering: factory sizing rates the 36 in x 84 in slab for openings up to 32 in wide by 80 in tall, and door height should equal opening height plus 1 in.
- Fasten the rail through the wall finish into a continuous wood header board or solid blocking lagged into studs; drywall anchors alone will not carry a 90 lb sliding slab. The rail centerline sets at 85.75 in above finished floor.
- Hang the slab, then set the end stops and anti-jump blocks and adjust the hangers so the door glides level along the full rail length.
- Install the floor guide plumb under the door path at the jamb line so the slab tracks straight without contacting the wall, and hold about a 1 in gap between the door bottom and finished floor.
- Do not trim the slab to size; trimming voids the warranty. Alternate slab sizes are quoted on request.
Warranty and Support
- 1 year limited manufacturer-backed warranty, confirmed during quote review.
- Quote packages include hardware adjustment guidance and finish care notes.
Frequently Asked Questions
What opening sizes does the 36 in door cover?
Factory sizing rates this slab for openings up to 32 in wide by 80 in tall, which leaves about 2 in of overlap per side and 4 in above an 80 in opening. Door height should equal opening height plus 1 in for full visual coverage.
Is the finish real wood?
The face is a factory applied Sandy Brown distressed woodgrain over a solid core composite slab. It delivers the sawn-lumber look without knots, warping, or site finishing, and wipes clean with a damp cloth.
Is the track hardware included?
Yes. The kit ships with the 78.75 in matte black rail, two roller hangers, end stops, anti-jump blocks, an adjustable floor guide, a pull handle, and the lag fasteners and anchors. Soft-close dampers are not included; alternates are reviewed during quote review.
Does the plank pattern show on both sides?
Yes. The two-panel plank layout and Sandy Brown finish are carried on both faces, so the door presents finished from inside and outside the room.
Documents
- Type Composite Barn Door
- SKU DA-DR-BRN-2PL-PLANK-36
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.