Door Axis 36 in x 84 in No-Panel Flush Primed Sliding Barn Door with Track Hardware Kit - front view

Door Axis 36 in x 84 in No-Panel Flush Primed Sliding Barn Door with Track Hardware Kit - angle view

Product image note: Images are representative of the product platform and the configuration shown. Final configuration, finish, and dimensions are confirmed during quote review.

Door Axis

Door Axis 36 in x 84 in No-Panel Flush Primed Sliding Barn Door with Track Hardware Kit

Name: Door Axis 36 in x 84 in No-Panel Flush Primed Sliding Barn Door with Track Hardware Kit
Brand: Door Axis
SKU: DA-DR-BRN-FLUSH-36

SKU: DA-DR-BRN-FLUSH-36

Size

36 in x 84 in

Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.

The Door Axis 36 in x 84 in No-Panel Flush Primed Sliding Barn Door is a complete opening kit that pairs a solid core composite slab with a matte black surface mount track system. It serves homeowners and remodelers converting a hinged or bifold opening on a pantry, laundry, closet, bedroom, or den into a space-saving sliding feature wall.

The slab is built as a 1.38 in thick solid core composite panel with a smooth, factory primed face that arrives ready for paint. The face carries no raised panels: a flat center field framed by wide stiles and rails gives a clean profile that reads modern or farmhouse depending on finish. The kit includes a 78.75 in matte black flat rail that mounts at 85.75 in above the floor, two top-mount roller hangers, end stops, anti-jump blocks, an adjustable floor guide, a matching pull handle, and the lag fasteners and anchors for installation into a blocked header. The door hangs from the rail rather than swinging, so the full floor plan in front of the opening stays usable. This size is stocked as the 36 in x 84 in slab; additional sizes are quoted on request.

Highlights

36 in x 84 in x 1.38 in solid core composite slab, about 90 lb hung weight
Smooth factory primed face, ready for paint, no raised panels
Flat center field framed by wide stiles and rails for a clean modern profile
Complete matte black track kit: 78.75 in flat rail, roller hangers, stops, floor guide, pull handle
Track mounts at 85.75 in above finished floor into a blocked header
Covers clear openings up to 32.5 in wide without casing, 30.5 in with casing
Universal reversible: slides from either side of the opening
Additional sizes are quoted on request

Specification Table

Configuration	Single sliding barn door slab with surface mount track hardware kit
Slab size	36 in W x 84 in H x 1.38 in thick
Opening coverage	Up to 32.5 in wide clear opening without casing; up to 30.5 in with standard casing (typical)
Door height rule	Door height equals opening height plus 1 in; about 1 in gap at floor
Core	Solid core
Material	Composite with smooth paint-ready primed face
Face profile	No raised panels; flat recessed center framed by wide stiles and rails
Handing	Universal reversible
Track length	78.75 in (6.56 ft) flat rail
Track mounting height	85.75 in above finished floor
Hardware finish	Matte black
Included hardware	Rail, two roller hangers, end stops, anti-jump blocks, floor guide, pull handle, fasteners and anchors
Weight	90 lb
Warranty	1 year limited manufacturer-backed warranty, confirmed during quote review

Included Components

Solid core composite barn door slab, primed smooth face
Matte black flat rail, 78.75 in, with standoff spacers
Two top-mount roller hangers with anti-jump blocks
Rail end stops and adjustable floor guide
Matte black pull handle
Lag fasteners, wall anchors, and printed installation instructions

Installation Notes

Measure the clear opening and casing before ordering: the 36 in slab overlaps the opening about 1 in per side and covers up to a 32.5 in clear opening without casing, 30.5 in with standard casing; door height should equal opening height plus 1 in.
Fasten the rail through the wall finish into a continuous wood header board or solid blocking lagged into studs; drywall anchors alone will not carry a 90 lb sliding slab. The rail centerline sets at 85.75 in above finished floor.
Hang the slab, then set the end stops and anti-jump blocks and adjust the hangers so the door glides level along the full rail length.
Install the floor guide plumb under the door path at the jamb line so the slab tracks straight without contacting the wall, and hold about a 1 in gap between the door bottom and finished floor.
Do not trim the slab to size; trimming voids the warranty. Alternate slab sizes are quoted on request.

Warranty and Support

1 year limited manufacturer-backed warranty, confirmed during quote review.
Quote packages include hardware adjustment guidance and paint preparation notes for the primed face.

Frequently Asked Questions

What opening sizes does the 36 in door cover?
Plan on about 1 in of overlap per side. Without casing the slab covers clear openings up to 32.5 in wide; with standard casing it covers openings up to 30.5 in. Door height should equal opening height plus 1 in so the slab shadows the full opening with about a 1 in floor gap.

Is the track hardware included or sold separately?
Everything ships in one kit: the 78.75 in matte black rail, two roller hangers, end stops, anti-jump blocks, an adjustable floor guide, a pull handle, and the lag fasteners and anchors.

Is a soft-close upgrade available?
Soft-close dampers are not included with this kit. If the project calls for soft-close operation, alternates are reviewed and priced during quote review.

Does the door arrive ready to paint?
Yes. The face is factory primed and smooth, so it accepts standard interior paint systems after a light scuff sand and cleaning. Do not trim the slab; trimming voids the warranty.