Door Axis 40 Series Aluminum Glass Swing Entry Door, European Profile
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
The Door Axis 40 Series Aluminum Glass Swing Entry Door is a European profile glass entry with a slim 1.57 in (40 mm) frame and a reinforced 3.50 in (89 mm) bottom rail. It serves homes, offices, and shops that want a glazed swing entrance with woodgrain or solid color finishes and a proper mortise lockset.
The leaf hangs on adjustable barrel hinges and closes on a European lever handle set with a mortise lock body and keyed cylinder. Glazing seats in a 0.98 in (25 mm) groove and can be ordered single or insulated, and a fixed sidelite extends the glass line for wider entries. Leaves run 27.5 to 37.4 in wide (700 to 950 mm) at heights to about 94.5 in (2400 mm), fabricated to the opening with inswing or outswing handing confirmed at order. Eight standard PVDF fluorocarbon and woodgrain film finishes match the rest of the Door Axis aluminum line.
Highlights
- Slim 1.57 in (40 mm) European aluminum profile
- Reinforced 3.50 in (89 mm) bottom rail
- Single or insulated glazing in a 0.98 in (25 mm) groove
- European lever handle set with mortise lock body and keyed cylinder
- Single leaf or single with fixed sidelite
- Inswing or outswing, left or right handing confirmed at order
- Eight standard PVDF fluorocarbon and woodgrain film finishes
Specification Table
| Configuration | Single leaf, or single leaf with fixed sidelite |
| Leaf sizing | Leaf widths 27.5 to 37.4 in (700 to 950 mm); heights to about 94.5 in (2400 mm); fabricated to opening size |
| Frame section | 1.57 in (40 mm) |
| Bottom rail | 3.50 in (89 mm) reinforced kick rail |
| Profile wall thickness | 0.055 in (1.4 mm) standard configuration, confirmed during quote review |
| Material | Extruded aluminum profiles |
| Glazing | Single or insulated glass, 0.98 in (25 mm) groove; Low-E options quoted on request |
| Handing | Inswing or outswing, left or right, confirmed at order |
| Hinges | Adjustable barrel hinges |
| Hardware | European lever handle set, mortise lock body, keyed cylinder |
| Weatherstripping | Perimeter gaskets and bottom seal |
| Finish system | PVDF fluorocarbon and woodgrain film finishes in eight standard colors |
| Representative weight | About 234 lb (106 kg) as a single leaf at 35.4 x 86.6 in (engineering estimate) |
| Warranty | Confirmed during quote review |
Included Components
- Aluminum frame set with weatherstripping
- Glazed swing leaf, prehung with adjustable barrel hinges
- Fixed sidelite frame and glazing (sidelite configuration)
- European lever handle set with mortise lock body, cylinder, and keys
- Perimeter gaskets and bottom seal
- Installation fasteners and shim guidance
Installation Notes
- Verify the rough opening, header, and sill condition before release, and confirm handing from the push side.
- On exterior openings install a sill pan and integrate flashing and waterproofing with the wall assembly.
- Set the frame plumb, level, and square, shim at hinge points, and adjust hinges for even reveals.
- Installation should be completed by a licensed contractor.
- Final leaf size, handing, and sidelite width are confirmed during quote review.
Warranty and Support
- Warranty coverage is confirmed during quote review before release.
- Quote packages include hardware adjustment guidance and finish care notes.
Frequently Asked Questions
Is the door prehung?
Yes. The leaf ships hung in its aluminum frame with hinges and lockset fitted, ready to set into the prepared opening.
Can I choose inswing or outswing?
Yes. Handing and swing direction are confirmed at order, left or right, inswing or outswing.
Which finishes are available?
Eight standard finishes: Sand Black, Sand Gray, Snow Gray, Pure White, Fluorocarbon Champagne, Red Cherry, Golden Oak, and Black Walnut, applied as PVDF fluorocarbon or woodgrain film over extruded aluminum.
Is insulated glass available?
Yes. The 25 mm glazing groove accepts single or insulated glass, and Low-E options are quoted on request.
Documents
- Type Aluminum Entry Door
- SKU DA-DR-EXT-ALUSWING40-SL-GO
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.