Door Axis Molded Composite Single Prehung Interior Door, Built to Order, 20 to 36 in Widths
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
The Door Axis Molded Composite Single Prehung Interior Door is a built to order program: pick the panel style and handing here, then set the exact width, height, core, and factory finish during quote review. It serves whole-house door schedules, odd-size openings, and projects that want factory finished doors delivered ready to hang.
Each unit is produced to the ordered dimension anywhere from 20 to 36 in wide and 80 to 96 in tall, hung on satin nickel ball bearing hinges in a 4-9/16 in flat jamb, with a single lockset bore. Panel styles cover the classic raised 6-panel, a straight-lined 3-panel, a clean modern 2-panel, and a craftsman layout, all molded in composite skins over an engineered wood frame that resists warping and carries SCS certification for at least 22 percent pre-consumer recycled wood fiber. A hollow core keeps closet and pantry doors light and affordable, while a solid core build is available where sound damping and a more substantial swing matter. The factory finish program spans primed plus 18 applied paint and stain tones from bright whites and grays through espresso and black, so an entire floor of doors can arrive finished, matched, and ready for hardware.
Highlights
- Built to order: widths 20 to 36 in and heights 80 to 96 in, sized during quote review
- Four panel styles: 6-Panel, 3-Panel, 2-Panel modern, and craftsman
- Factory finish program: primed plus 18 applied paint and stain tones
- Hollow core standard; solid core build available for sound control
- Satin nickel ball bearing hinges hung in a 4-9/16 in flat jamb
- Single lockset bore, ready for standard hardware
- Molded composite skins resist warping, shrinking, and cracking
- SCS certified, at least 22 percent pre-consumer recycled wood fiber
Specification Table
| Configuration | Single prehung interior door, built to order |
| Width range | 20 to 36 in, configured to the ordered size |
| Height range | 80 to 96 in, configured to the ordered size |
| Slab thickness | 1-3/8 in (1.375 in) |
| Rough opening | Ordered width plus about 2 in, height plus about 2.5 in (typical) |
| Panel styles | 6-Panel, 3-Panel, 2-Panel modern, craftsman |
| Core | Hollow core standard; solid core configured at quote |
| Material | Molded composite skins over engineered wood frame |
| Handing | Left-Hand or Right-Hand |
| Jamb | 4-9/16 in wood flat jamb |
| Hinges | Satin nickel ball bearing, factory hung |
| Hardware prep | Single lockset bore |
| Finish program | Primed plus 18 factory paint and stain tones, selected at quote |
| Weight | About 55 to 60 lb typical 30 in x 80 in hollow core build (estimate) |
| Warranty | 5-year limited manufacturer-backed warranty, confirmed during quote review |
Included Components
- Molded composite slab in the ordered style, size, and finish, factory hung
- 4-9/16 in wood flat jamb (assembled frame)
- Satin nickel ball bearing hinges, mortised and installed
- Factory single lockset bore (lockset sold separately)
- Installation instructions
Installation Notes
- Measure every opening before quote review: order to the framed rough opening, planning slab width plus about 2 in and height plus about 2.5 in.
- Set each unit plumb and level and shim behind hinge locations and at the strike before fastening through the jamb.
- Hold slabs about 1/2 in above the finished floor and increase clearance where carpet or thick flooring is planned.
- Factory finished doors need no site paint; primed builds should be painted and sealed on all six slab edges.
- Because units are built to order, confirm style, finish, core, and dimensions on the quote sheet before release; built to order doors are generally not returnable.
Warranty and Support
- 5-year limited manufacturer-backed warranty, confirmed during quote review.
- Quote review covers the full door schedule: sizes, styles, cores, finishes, and handing per opening.
Frequently Asked Questions
How does ordering a built to order door work?
Choose the panel style and handing on the product page, then quote review locks the exact width, height, core, and factory finish for each opening before anything is produced.
Should I pick hollow or solid core?
Hollow core is lighter and economical, right for closets, pantries, and low-traffic rooms. Solid core adds mass that damps sound and feels more substantial, worth it for bedrooms, offices, and media rooms. The core choice is configured during quote review.
What finishes are available?
Primed for site painting, plus 18 factory-applied paint and stain tones ranging from whites, grays, and sand tones to espresso, black, and cherry-toned stains. Finish chips are confirmed during quote review.
Can I match several doors across a renovation?
Yes. Because every unit is built to order on one platform, a whole door schedule can share one style and finish while each opening gets its own size and handing.
Documents
- Type Composite Prehung Interior Door
- SKU DA-DR-INT-MLD-COLL-6P-LH
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.