Door Axis Soft Close Aluminum Track Pocket Door Frame Kit, 24 to 36 in Doors up to 84 in
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
The Door Axis Soft Close Aluminum Track Pocket Door Frame Kit puts a damped, self-closing glide inside the wall: the door drifts shut on both travel directions instead of slamming into the pocket or the jamb. It serves bedrooms, bathrooms, and offices upgrading to pocket doors without giving up the soft close feel of premium cabinetry.
The kit is a universal lightweight frame for standard 2x4 stud walls, sized on site to any door from 23 to 36 in wide, up to 84 in tall, 1 to 1-3/4 in thick, and 88 lb. The track is heavy-walled extruded aluminum with a wood mounting slot, carried on four galvanized steel tube uprights that stiffen the wall faces and keep fasteners out of the door path, while self-adjusting floor anchors let the structure ride out floor settling without racking the header. The double sided soft close and open damper is rated through a 100,000 cycle test, catching the slab near each end of travel and easing it home. The box includes four uprights, the aluminum track, the double sided soft close, two hangers with mounting plates, two mounting brackets, a floor-mounted door guide, and two adjustable floor anchors; the door slab and pulls are sold separately.
Highlights
- Double sided soft close and open, 100,000 cycle tested
- Universal fit: cut to door widths 23 to 36 in on site
- Handles doors up to 84 in tall, 1 to 1-3/4 in thick, 88 lb
- Heavy-walled aluminum track resists door jump
- Galvanized steel tube uprights stiffen wall faces and block stray fasteners
- Self-adjusting floor anchors ride out floor settling
- Fits standard 2x4 stud walls, residential or commercial
- Complete hardware kit; door slab and pulls sold separately
Specification Table
| Configuration | Single pocket door frame and track kit with soft close |
| Door capacity | 23 to 36 in wide, up to 84 in high, 1 to 1-3/4 in thick |
| Door weight rating | Up to 88 lb (lightweight interior slabs) |
| Soft close | Double sided soft close and open damper, 100,000 cycle tested |
| Track | Heavy-walled aluminum with wood mounting slot, jump-resistant |
| Uprights | 4 galvanized steel tube uprights |
| Floor anchors | 2 self-adjusting anchors maintain header and track alignment |
| Wall type | Standard 2x4 stud walls |
| Frame assembly size | 36 x 84 x 1.75 in at maximum door size, cut down on site |
| Included | 4 uprights, track, soft close, 2 hangers with plates, 2 brackets, door guide, 2 floor anchors |
| Kit weight | About 20 lb |
| Warranty | Limited lifetime manufacturer-backed warranty, confirmed during quote review |
Included Components
- Heavy-walled aluminum track with wood mounting slot
- 4 galvanized steel tube uprights
- Double sided soft close and open damper
- 2 door hangers with mounting plates
- 2 mounting brackets
- Floor-mounted door guide
- 2 self-adjusting floor anchors
- Door slab and pulls sold separately
Installation Notes
- Confirm the door first: this kit is rated for lightweight slabs up to 88 lb, which covers hollow core and most 84 in lightweight doors; verify solid core weights before ordering.
- Frame per the included instructions, cutting the track and header to the door width; the pocket side runs about the same width again as the passage.
- Set the track dead level and the uprights plumb before closing the wall; the soft close mechanism needs a true track to catch and release cleanly.
- Keep drywall screws short at the pocket faces so they cannot score the slab, and set the floor guide so the door cannot rub either face.
- Adjust the hangers and floor anchors after flooring is finished, then cycle the door to confirm the soft close catches at both ends of travel.
Warranty and Support
- Limited lifetime manufacturer-backed warranty, confirmed during quote review.
- Support includes door weight and thickness compatibility checks before release.
Frequently Asked Questions
What does double sided soft close mean?
There is a damper at each end of travel. Push the door toward closed and it catches near the jamb and eases shut; slide it open and it catches near the pocket and settles in without banging.
Will it fit my door?
The kit adjusts to doors 23 to 36 in wide, up to 84 in tall, and 1 to 1-3/4 in thick, with a maximum door weight of 88 lb. Track and header are cut to your door width during framing.
Does it include the door or pulls?
No. This is the in-wall frame, track, and soft close hardware. Pair it with any compatible slab and pocket door pull set, ordered separately.
Can it go in a 2x6 wall?
The kit is engineered for standard 2x4 stud walls. For thicker walls, furring or a different frame format is reviewed during quote.
Documents
- Type Pocket Door Frame
- SKU DA-DR-PKT-SOFT
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.