Fast Balcony WPC Composite Deck Board and Keel Clip Hardware Set
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
The Fast Balcony WPC Composite Deck Board and Keel Clip Hardware Set is the complete walking-surface package for one balcony: 140 x 25 mm composite boards with the aluminum keels, clip buckles, and screws that fasten them. It covers deck replacement on existing balconies, surface changes at renovation, and spare-set stocking for multifamily maintenance teams.
Boards are a 140 x 25 mm WPC composite profile that clips to aluminum keels with buckle fasteners and screws, so the walking surface installs without face screwing and individual boards can be replaced later. Sets are sized to the standard platform grid, from 32 sq ft for a 4 ft x 8 ft balcony to 50 sq ft for a 5 ft x 10 ft, with keel count matched to the coverage. The assembly sits over the balcony frame and aligns level with the interior subfloor, and drainage passes through the board gaps. Board colorway is through-colored composite confirmed during quote review.
Highlights
- Complete deck surface set: boards, keels, clip buckles, and screws
- WPC composite board, 140 x 25 mm profile
- Clip-and-keel fastening with no face screws; boards individually replaceable
- Five coverage sets matching the platform grid, 32 to 50 sq ft
- Set weights 131 to 205 lb published for freight and handling
- Drainage passes through board gaps; surface aligns level with the interior subfloor
Specification Table
| Kit scope | WPC boards, aluminum keels, clip buckles, and screws for one balcony |
| Board profile | WPC composite, 140 x 25 mm |
| Fastening | Clip-and-keel with buckle fasteners; no face screwing |
| Coverage sets | 4 ft x 8 ft = 32 sq ft; 5 ft x 8 ft = 40 sq ft; 4 ft x 9 ft 6 in = 38 sq ft; 5 ft x 9 ft 6 in = 47.5 sq ft; 5 ft x 10 ft = 50 sq ft |
| Board color | Through-colored composite; colorway confirmed during quote review |
| Installation | Assembles over the balcony frame, aligned level with the interior subfloor |
| Set weight | About 131 lb (32 sq ft) to 205 lb (50 sq ft) (engineering estimate) |
| Lead time | Confirmed during quote review |
| Freight | Ships by commercial freight; freight confirmed during quote review |
| Warranty | Warranty coverage for the final quoted configuration is documented and confirmed during quote review |
Included Components
- WPC composite deck boards cut for the selected coverage
- Aluminum keels matched to the coverage
- Clip buckles and screws for the full board schedule
- Installation sequence in the released documents
Installation Notes
- Verify the balcony frame is sound and level before decking; structural questions route to the project engineer of record.
- Set keels per the released layout, then clip boards with the buckle fasteners in sequence; do not face-screw boards.
- Align the finished surface level with the interior subfloor line where the balcony was set to that datum.
- Leave the documented board gaps for drainage; do not caulk or seal the gaps.
- Wash the composite surface with mild detergent and water; individual boards unclip for replacement.
Warranty and Support
- Warranty coverage for the final quoted configuration is documented and confirmed during quote review.
- Composite boards are through-colored and are cleaned with mild detergent; avoid solvent cleaners and pressure washing at close range.
Frequently Asked Questions
Will this set fit my existing balcony?
Sets are cut to the standard platform grid and fit the matching Fast Balcony frames directly. For other frames, send the deck dimensions with the quote request and the set is cut to project during quote review.
Can I replace a single damaged board later?
Yes. The clip-and-keel system holds each board with buckle fasteners, so one board unclips and replaces without disturbing the rest of the deck.
Is the composite deck waterproof?
The surface drains through the board gaps, which suits open-air balconies. For a dry space below the balcony, the interlocking watertight aluminum deck program is the right product instead.
What colors are available?
Boards are through-colored composite in the program colorways, confirmed during quote review. They are not powder coated, so the deck color is independent of the frame finish.
Documents
- Type Balcony Component
- SKU FB-BAL-ACC-WPC-48
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.