Light Archon Alder 52 in. Integrated LED Downrod Ceiling Fan with Reversible Walnut Blades

The Light Archon Alder is a 52 in. downrod ceiling fan that pairs a metal housing with four reversible blades finished silver on one face and a warm walnut tone on the other, so one fan reads modern or woodgrain depending on which face you install. A dimmable integrated LED light kit delivers 1300 lumens of 3000K warm white, and the whole package runs on simple, reliable pull chains. Pricing is quote-based: add it to a quote list and the desk confirms finish and delivery.

A 3-speed AC motor with manual reverse moves up to 4183 CFM, sized for bedrooms, living rooms, and other large rooms to about 400 sq. ft. Run it forward in summer and reversed in winter to push warm ceiling air back into the room. The 4.5 in. downrod included in the box sets the standard drop, threaded downrods extend it for taller ceilings, and the mounting system supports sloped ceilings per source documentation. Two housing finishes are offered, brushed steel and midnight black, both carrying the same silver-or-walnut reversible blade set. The platform is UL listed for dry interior locations and hangs only from a listed fan-rated outlet box.

Highlights

• 52 in. span moves up to 4183 CFM on high
• Reversible blades: silver face or walnut-tone face
• Dimmable integrated LED: 1300 lumens at 3000K
• 3-speed AC motor with manual reverse for winter mode
• Pull chain control, no electronics to pair
• 4.5 in. downrod included; threaded downrods extend the drop
• Sloped-ceiling mounting supported per source documentation
• UL listed; 3-year limited warranty program

Specification Table

Included Components

• Fan motor assembly in the selected housing finish
• 4 reversible blades (silver and walnut-tone faces)
• Integrated LED light kit
• 4.5 in. downrod and mounting hardware
• Pull chains installed

Installation Notes

• Mount only to an outlet box listed for ceiling fan support (fan-rated); a standard light-fixture box is not acceptable.
• Maintain at least 7 ft. from floor to blades and 18 in. from blade tips to the nearest wall.
• Use the included 4.5 in. downrod for standard ceilings; threaded downrods extend the drop for taller rooms.
• Sloped-ceiling installation is supported per source documentation; confirm the slope angle at quote review.
• Installation should be completed by a qualified electrician on a switched 120V circuit.

Warranty and Support

• 3-year limited warranty program confirmed at quote review
• Specifier support and submittal documents available on request
• Replacement blade and light kit paths confirmed at quote review

Frequently Asked Questions

Do I need a special outlet box?
Yes. Every ceiling fan must hang from an outlet box listed for fan support (fan-rated). If the existing box is a standard light-fixture box, plan a fan-rated pancake or deep box at rough-in or retrofit.

How do the reversible blades work?
Each of the four blades is finished silver on one face and a walnut wood tone on the other. Choose the face at installation to match the room; flipping later is a simple re-mount of the blades.

Can it hang on a sloped or tall ceiling?
Sloped-ceiling mounting is supported per source documentation, and the threaded downrod system accepts longer rods for tall ceilings. The included rod is 4.5 in. for standard heights.

How does the reverse function help in winter?
Switch the manual reverse and run low speed: the fan pulls air up through the blades and pushes warm ceiling air back down the walls without wind chill.

Documents

• Product Submittal Summary (PDF)
• Dimensional & Fit Reference (PDF)
• Installation & Warranty Reference (PDF)

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.