Light Archon Beacon 50 ft. 12/3 Heavy-Duty Outdoor Extension Cord with Lighted End
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
The Light Archon Beacon is the jobsite power run: a 50 ft 12/3 SJTW heavy-duty outdoor extension cord with a lighted end that shows power at a glance, rated 15 A for saws, compressors, and heaters that light-duty cords cannot carry.
Twelve-gauge conductors hold voltage over the full 50 ft run, so motors start strong instead of sagging. The hi-visibility jacket resists moisture, abrasion, and prolonged sun, and reads clearly against dirt and deck so nobody trips the run. The illuminated plug end confirms the circuit is live before you walk back to the panel. UL Listed and OSHA-acceptable for site work.
Highlights
- 12 AWG 3-conductor SJTW cord, 15 A at 125V
- Lighted end shows live power at a glance
- Hi-visibility jacket resists moisture, abrasion, and sunlight
- Holds voltage for motor loads over the full 50 ft run
- UL Listed, meets OSHA jobsite requirements
- Grounded NEMA 5-15 fittings
Specification Table
| Series | Beacon |
| Type | Heavy-duty extension cord, lighted end |
| Conductors | 12 AWG x 3, grounded |
| Rating | 15 A at 125V |
| Fittings | NEMA 5-15 plug to one 5-15R lighted outlet |
| Jacket | Hi-visibility PVC, moisture, abrasion, and sun resistant |
| Length | 50 ft |
| Listings | UL Listed; meets OSHA jobsite requirements |
Included Components
- One 50 ft heavy-duty extension cord
- Molded lighted receptacle end and grounded plug, factory fitted
Installation Notes
- Uncoil fully before loading; a coiled cord under load builds heat
- Match total connected load to the 15 A rating
- Use GFCI-protected receptacles outdoors and on site
- Inspect jacket and blades before each use; retire damaged cords
Warranty and Support
- Light Archon limited trade warranty; term confirmed on the quote sheet
- Quote-first program: no public prices; submit the quote list for project terms
- Light Archon trade support validates configuration and freight at review
Frequently Asked Questions
What loads need a 12/3 cord?
Motor and heating loads: circular saws, compressors, space heaters, and shop vacuums. The heavier conductors keep voltage up so motors run cool. For light-duty string lights and chargers the 16/3 Tether series is the economical pick.
What does the lighted end do?
The receptacle end glows when the cord is energized, confirming live power at the work end without walking the run back to the source.
How is it priced?
Light Archon is quote-first. Add the cord to your quote list and a specifier returns project terms in one pass.
Documents
- Type Extension Cord
- SKU LA-LGT-PWR-C123-BEACON
- Catalog Reference Installation & Warranty Reference (PDF)
- Spec PDF Open product spec summary
- Submittal PDF Open submittal reference
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.