Light Archon Marlowe 1-Light Wall Sconce with Integrated Switch

The Light Archon Marlowe is the workhorse switched sconce: a steel single-light body, a frosted white bell shade, and an on-body switch that controls the lamp without a dedicated wall switch leg. That switch makes it the fast answer for retrofits, rentals, basements, and any wall where re-running control conductors is not in the project plan.

Two finishes cover most trim palettes, Brushed Nickel and Oil-Rubbed Bronze, both on the same 6 in. wide, 9.25 in. tall platform with a 5 in. square backplate that covers a standard wall J-box. The frosted bell shade softens a single E26 lamp up to 60 watts or the LED equivalent, and the fixture is damp rated for bath walls and utility halls. Feed it from a switched or always-hot 120V supply; either way the on-body switch gives local control at the fixture. It also dims with a compatible lamp and wall dimmer where a control leg exists. Steel construction and included hardware keep installs quick. Specify finish and count on the quote list; the desk confirms terms and freight in one reply.

Highlights

• On-body switch controls the lamp with no wall switch leg needed
• Frosted white bell shade for soft, even output
• Two finishes: Brushed Nickel and Oil-Rubbed Bronze
• Single E26 socket, 60 watts max, LED compatible
• 5 in. square backplate covers a standard wall J-box
• Damp rated for bath walls and utility spaces
• Steel body with included mounting hardware
• Dims with a compatible lamp and wall dimmer

Specification Table

Included Components

• Wall sconce with frosted bell shade
• Backplate and mounting hardware pack
• Installation instructions
• Lamp not included, specified at quote

Installation Notes

• Hardwired to a 120V circuit; de-power at the panel before work
• Mounts to a standard wall J-box behind the 5 in. backplate
• Works on switched or always-hot supplies; the on-body switch gives local control
• Typical mount height 60 to 66 in. to center above finished floor
• Damp rated: bath and utility walls supported

Warranty and Support

• Limited platform warranty confirmed on the quote sheet
• Quote-first program: no public prices; submit the list for terms

Frequently Asked Questions

What does the Marlowe mount to?
A standard wall J-box. The 5 in. square backplate covers the box, and the shade can face up or down to suit the wall.

Do I need a wall switch for it?
No. The on-body switch controls the lamp locally, so an always-hot supply works. If a switched leg exists, both controls operate.

Which lamp does it take?
One E26 lamp up to 60 watts, A19 shape recommended, incandescent, CFL, or LED. It dims when matched with a compatible lamp and wall dimmer.

Is it suitable for a bathroom?
Yes, the platform is damp rated for bath walls and similar moisture zones.

Documents

• Product Submittal Summary (PDF)
• Dimensional & Fit Reference (PDF)
• Installation & Warranty Reference (PDF)

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.