Light Archon Marquee 10-Light USB Mirror Light Kit with 3 Color Temperatures, White
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
The Light Archon Marquee strings ten frosted LED bulbs along a fine transparent wire so a plain dressing mirror reads like a lit makeup station. The bulbs slide along roughly 16 ft. of wire to match mirrors of different sizes, fix in place with adhesive points, and run entirely from USB power. No junction box, no hardwiring, no public prices: build a quote list and the desk confirms the rest.
Three color temperatures cover the real use cases at a mirror: 3000K warm for evening, 4000K neutral for everyday, and 6500K daylight for color-critical work. Brightness steps through 10 levels from 10 to 100 percent on the inline controller, and an anti-flicker driver keeps the output steady on camera per source documentation. Extra wire hides inside the end bases for a clean edge, and the transparent run between bulbs disappears against the glass. Because the kit draws from any USB source, it works at a fixed vanity, a travel case, or a fitting room wall. Photometrics beyond the listed modes are confirmed at quote review.
Highlights
- 10 frosted LED bulbs on an adjustable transparent wire
- 3 color temperatures: 3000K, 4000K, 6500K
- 10 brightness levels from 10 to 100 percent
- About 16 ft. of wire; bulbs slide to fit the mirror
- Adhesive fixing points; no drilling or hardwiring
- USB powered: wall adapter, laptop, or power bank
- Anti-flicker driver for steady on-camera light per source documentation
- Extra wire stows in the bases for a clean install
Specification Table
| Series | Marquee |
| Kit type | USB mirror light kit, 10 bulbs |
| Wire run | 196 in. total per source documentation |
| Bulb height | 1.8 in. per module |
| LED | Integrated, 8 W total |
| Color temperatures | 3000K, 4000K, 6500K selectable |
| Dimming | 10 levels, 10 to 100 percent |
| Control | Inline controller on the cord |
| Power | USB 5V low voltage |
| Fixing | Adhesive points, no drilling |
| Wiring | None; no junction box or hardwiring |
| Location | Dry rated, indoor |
| Finish | White bulb modules, transparent wire |
Included Components
- 10-bulb light wire with frosted modules
- Inline controller with mode and brightness buttons
- Adhesive fixing points
- USB power lead; any USB 5V source works
Installation Notes
- Lay out the wire along the mirror edge and slide bulbs to the spacing you want.
- Fix the wire with the adhesive points; hide extra wire inside the end bases.
- Plug the USB lead into a wall adapter, laptop, or power bank.
- Select color temperature and brightness from the inline controller.
- Dry locations only; keep connections away from direct water.
Warranty and Support
- Limited platform warranty confirmed on the quote sheet
- Quote-first program: no public prices; submit the list for project terms
Frequently Asked Questions
Does it need a junction box or an electrician?
No. The Marquee is a low-voltage USB kit that fixes with adhesive points. There is no wall box, no switch leg, and no hardwired circuit anywhere in the install.
Will it fit my mirror?
Almost certainly. The bulbs slide along about 16 ft. of wire, so you set the spacing for anything from a compact vanity mirror to a full dressing mirror, and stow the extra wire in the bases.
Which color temperature should I use?
3000K reads warm and soft for evening, 4000K is the neutral everyday setting, and 6500K daylight is the color-accurate choice for makeup matching.
What powers it?
Any USB 5V source: a wall USB adapter, a laptop port, or a power bank for portable use.
Documents
- Type Vanity Light
- SKU LA-LGT-VN-K10-MARQ
- Catalog Reference Installation & Warranty Reference (PDF)
- Spec PDF Open product spec summary
- Submittal PDF Open submittal reference
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.