Light Archon Nightwatch 15A Illuminated 3-Way Rocker Switch with Night Light

The Light Archon Nightwatch puts a guide light where your hand already goes: a 15 A, 120V AC rocker switch with an integrated LED night light that switches itself on when the room goes dark. Wired 3-way it covers hallways and stair landings from two locations; it also wires single-pole for bedrooms and baths. Quote-first: add it to your quote list and the trade desk confirms counts before release.

A built-in light sensor watches ambient level and lights the LED strip when the room drops below roughly 12 lux, then shuts it off in daylight, drawing just 0.2W. The full-width designer rectangular paddle runs LED lighting loads at 15 A, and the flame-retardant polycarbonate body carries a UL94 V-2 material rating with cETLus listing. A matching White wall plate ships in the box, so the device trims out complete without a separate plate line.

Highlights

• 15 A, 120V AC rocker switch with integrated LED night light
• Light sensor switches the night light automatically below about 12 lux
• Night light draws 0.2W
• 3-way wiring for two-location control; also wires single-pole
• Designer rectangular paddle in White
• Flame-retardant polycarbonate body, UL94 V-2 material rating
• Matching wall plate included
• cETLus Listed

Specification Table

Included Components

• Nightwatch illuminated 3-way rocker switch, White
• Matching White wall plate
• Mounting screws

Installation Notes

• Installed by a licensed electrician in a standard single-gang box; verify box fill
• 3-way circuits use two 3-way switches; this unit also wires single-pole
• Requires a neutral-free standard switch loop or per the wiring diagram supplied with the unit; verified at rough-in
• Confirm load type and total load stay within the switch rating
• Keep the sensor window clear of paint and wall texture at trim-out

Warranty and Support

• Covered by the Light Archon limited trade warranty; term confirmed at quote review
• Submittal sheets and dimensional PDFs available for every configuration
• Support through the Light Archon trade desk

Frequently Asked Questions

What box does it need?
A standard single-gang wall box. Your installer verifies box fill for the conductors present per NEC 314.16.

Does the night light stay on all day?
No. The built-in sensor lights it only when ambient light falls below roughly 12 lux and shuts it off in daylight. It draws 0.2W while lit.

Can I use it in a single-pole circuit?
Yes. A 3-way switch wires single-pole by using the common and one traveler terminal; your electrician lands it per the diagram.

Is a wall plate included?
Yes. A matching White plate ships in the box, so no separate plate line is needed.

Documents

• Product Submittal Summary (PDF)
• Dimensional & Fit Reference (PDF)
• Installation & Warranty Reference (PDF)

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.