Light Archon Serena Low Profile LED Surface Mount Light, Wet Rated, Selectable CCT

SKU: LA-LGT-FM-D46-SEREN-4
Size

Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.

Light Archon Serena is a low profile LED surface mount that brings a recessed look to junction box installs, with a wet location listing that clears showers and protected outdoor ceilings. The 4 in. size delivers 780 lumens at 8 watts and the 6 in. size delivers 800 lumens, each with five selectable color temperatures from 2700K to 5000K on a 5-position switch. Quote-first record: sizes and counts are confirmed at quote review.

Serena mounts to standard junction boxes with a redesigned bracket that speeds the fit-up, and the visible profile holds to about 0.5 in. below the ceiling per source documentation, so tight corridors and high-rise slab ceilings keep their headroom. The platform is IC rated, dims to 5 percent with a compatible 120V dimmer, and serves residential and commercial spaces across bathrooms, foyers, garages, and offices. UL and FCC certifications carry RoHS plus Title 20 and Title 24 recognition per source documentation, and a 5 year limited warranty backs the array. Color accuracy runs 80 CRI typical and is confirmed at quote review.

Highlights

  • Wet location listed; suitable for showers and protected outdoor ceilings
  • 780 lumens at 8 watts in the 4 in. size; 800 lumens in the 6 in. size
  • Five selectable color temperatures: 2700K, 3000K, 3500K, 4000K, 5000K
  • About 0.5 in. visible profile per source documentation for a near-recessed look
  • Mounts to standard junction boxes with a quick-fit bracket
  • IC rated and dimmable to 5 percent with a compatible 120V dimmer
  • UL and FCC certified; Title 20 and Title 24 per source documentation
  • 5 year limited warranty

Specification Table

Sizes 4 in. and 6 in.
Trim (4 in. size) 4 in. face; 2.59 in. listed overall depth including the rear driver
Visible profile About 0.5 in. per source documentation
Lumens 780 (4 in.); 800 (6 in.)
Color temperature 2700K to 5000K in five steps
Color accuracy 80 CRI typical, confirmed at quote review
Watts 8 (4 in.); 6 in. size confirmed at quote review
Input 120V
Dimming To 5 percent with a compatible 120V dimmer
Location Wet rated
IC contact IC rated
Mounting Standard ceiling junction boxes with the included bracket
Listings UL, FCC, RoHS; Title 20 and Title 24 per source documentation
Warranty 5 year limited

Included Components

  • LED surface mount fixture
  • Quick-fit mounting bracket and hardware
  • Installation instructions

Installation Notes

  • Shut power at the breaker and verify with a tester before any work at the junction box.
  • Fasten the bracket to the junction box, land the supply on the fixture connectors, and snug the trim to the ceiling.
  • Set the 5-position color temperature switch before final closure.
  • Wet location listing covers showers and protected outdoor ceilings when installed to the listing terms.
  • Confirm dimmer compatibility at quote review; low end is 5 percent on a compatible 120V dimmer.

Warranty and Support

  • 5 year limited warranty
  • Support and replacement paths are confirmed at quote review

Frequently Asked Questions

What box does it mount to?
It mounts to standard ceiling junction boxes with the included quick-fit bracket, simplifying installs in slab ceilings and remodels where vertical space is limited; exact box fit is confirmed at quote review.

Can it go over a shower?
Yes. The platform is wet location listed, which covers showers and protected outdoor ceilings when installed per the listing.

Which size do I need?
The 4 in. size suits closets, halls, and accent runs at 780 lumens; the 6 in. size covers general room duty at 800 lumens. Mix sizes on one quote and our team aligns counts at quote review.

Is it dimmable?
Yes, to 5 percent with a compatible 120V dimmer; send your dimmer model with the quote for verification.

Documents

Download the available product documents below. If a document is not linked yet, use the SKU during quote review.

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.