Light Archon Spectra Select A19 LED Bulb, 40-100W Equivalent, Selectable CCT, 3-Pack

The Light Archon Spectra Select A19 collapses an entire stockroom of lamps into one SKU: two selector switches on the bulb pick the light output, from a 40 W equivalent 450 lumens up to a 100 W equivalent 1600 lumens, and the color temperature, across six points from 2700K soft white to 6500K daylight. Sold as a 3-pack. Pricing is quote-based: add it to your quote list and our team confirms count and delivery.

Set each lamp once at install and it holds the setting through power cycles. Output tops out at 1600 lumens while drawing 13.5 W at most, color rendition is a high-accuracy 90 CRI at every setting, and dimming runs down to 10 percent on LED-rated dimmers. The frosted A19 envelope is damp rated and approved for enclosed fixtures, so the same 3-pack covers bedside lamps, hallway flush mounts, and covered porch fixtures with one spec line.

Highlights

• Selectable output: 450, 800, 1100, or 1600 lumens
• Selectable CCT: 2700K to 6500K in six steps
• One lamp replaces the 40 to 100 W equivalent shelf
• 90 CRI color rendition at every setting
• Dims to 10 percent on LED-rated dimmers
• Damp rated and enclosed-fixture approved
• 15,000 hour published life
• Standard E26 medium base, 120V

Specification Table

Included Components

• 3 x A19 selectable LED lamps

Installation Notes

• Set the lumen and CCT selector switches on the lamp neck before installing.
• Use LED-rated dimmers for smooth low-end dimming; verify dimmer model at quote review.
• Damp rated: fine for covered exterior fixtures, not for direct rain exposure.
• Approved for enclosed fixtures; observe fixture max-watt labels.

Warranty and Support

• 5-year limited warranty program; terms confirmed at quote review
• Volume and project-pack counts confirmed at quote review

Frequently Asked Questions

Which fixtures does it fit?
Any E26 medium-base socket rated for at least a 13.5 W LED lamp, including fully enclosed fixtures and damp-rated covered outdoor housings.

How do the selectors work?
Two switches on the lamp neck: one picks the output step (450 to 1600 lumens), the other picks one of six CCT points. Settings hold until you move the switches.

Will it dim smoothly?
Yes, down to about 10 percent on LED-rated dimmers. Legacy incandescent dimmers may flicker at the low end; confirm dimmer models at quote review.

Is the 100 W setting safe in a 60 W fixture?
Yes. Even at the 1600 lumen setting the lamp draws only 13.5 W, far below a 60 W fixture label, while producing 100 W equivalent light.

Documents

• Product Submittal Summary (PDF)
• Dimensional & Fit Reference (PDF)
• Installation & Warranty Reference (PDF)

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.