Light Archon Starlet 14-Light USB Mirror Light Kit with Dimming and 3 Light Modes, White

SKU: LA-LGT-VN-K14-STLT

Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.

The Light Archon Starlet is a 14-bulb USB mirror light kit that turns any dressing mirror into an evenly lit makeup station without an electrician. Fourteen frosted white bulb modules run along a connected cord and wash the face from both sides of the glass, and the whole kit draws its power from a USB port, power bank, or wall USB adapter. There is no junction box, no hardwiring, and no public price: add it to a quote list and the desk confirms configuration and delivery.

An inline button controller handles everything: press to power on or off, then step through 10 brightness levels and 3 light modes spanning a warm glow to a cool daylight-class white per source documentation. The frosted modules keep output soft and even, which is the point at a mirror, and the low-voltage 5V 2A supply stays cool to the touch during long sessions. The kit suits vanities and mirrors from about 12 in. and up, and it travels well: any USB source runs it, so the same kit works at a fixed vanity, a backstage table, or a fitting area. Photometrics are carried from source documentation and confirmed at quote review.

Highlights

  • 14 frosted bulb modules for even, shadow-free face light
  • USB 5V 2A power: adapter, power bank, or PC port
  • No junction box, hardwiring, or electrician required
  • 10 brightness levels from the inline controller
  • 3 light modes from warm to daylight-class white
  • Flame-retardant ABS construction per source documentation
  • Low-voltage operation stays cool at the mirror
  • Suits mirrors and vanities from about 12 in. and up

Specification Table

Series Starlet
Kit type USB mirror light kit, 14 bulbs
Kit footprint 9.8 in. W x 2 in. H x 5.5 in. D, bulbs packed
LED Integrated, 10 W total
Light output 140 lumens per source documentation, face-lighting class
Light modes 3, nominal 3200K to 10000K span per source documentation
Dimming 10 levels via inline controller
Control Inline button controller on the cord
Power USB 5V 2A low voltage
Wiring None; no junction box or hardwiring
Location Dry rated, indoor
Material Flame-retardant ABS plastic
Finish White
Recommended mirror 12 in. and up

Included Components

  • 14-bulb connected light cord with frosted modules
  • Inline button controller
  • USB power lead
  • USB wall adapter not included; any 5V 2A source works

Installation Notes

  • Route the cord along the mirror edge with bulbs spaced evenly on both sides.
  • Plug the USB lead into a 5V 2A wall adapter, power bank, or PC port.
  • No junction box, wall switch, or hardwired circuit is required.
  • Set brightness and light mode from the inline controller after placement.
  • Dry locations only; keep the controller and connections away from direct water.

Warranty and Support

  • Limited platform warranty confirmed on the quote sheet
  • Quote-first program: no public prices; submit the list for project terms

Frequently Asked Questions

Does it need a junction box or hardwiring?
No. The Starlet is a low-voltage USB kit: route the cord along the mirror, plug into any USB 5V 2A source, and it is running. No wall box, switch leg, or electrician is involved.

How bright is it?
The source documentation lists 140 lumens across the kit, which is face-lighting class output for makeup work at the mirror rather than room lighting. Ten dim levels adjust it down for evening use.

What can power it?
Any USB source rated 5V 2A: a wall USB adapter, a power bank for portable setups, or a PC port at a desk vanity.

Which light mode is best for makeup?
Use the warm mode for evening looks and the daylight-class modes for color-accurate daytime work. The 3 modes step through the range from the inline controller.

Documents

Download the available product documents below. If a document is not linked yet, use the SKU during quote review.

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.