Light Archon Veranda S14 Filament LED Patio Light Strand, Indoor and Outdoor

SKU: LA-LGT-SL-G48-VRNDA-24-BK
Length
Finish

Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.

The Light Archon Veranda strand throws a warm line of cafe light over patios, decks, and dining rooms alike: S14 filament LED lamps on 24 in. centers, a heavy-duty 18/2 SJTW cord in black or white, and a wet-location listing that keeps it up year round. Choose 24 ft. with 12 lamps or 48 ft. with 24. Pricing is quote-based: add it to your quote list and our team confirms length, cord finish, and delivery.

Each impact-resistant lamp draws just 1 W while glowing at 40 lumens, so even the 48 ft. strand totals 24 W and up to 12 strands run end to end from a single 120V outlet, enough to wrap a whole terrace. The 48 ft. strand ships with 2 spare lamps, sockets are standard E26 for easy service, and the lamps hold their warm glow without the fragility of glass filament antiques. Lead cord runs 18 in. to the first socket with a 6 in. tail for clean runs.

Highlights

  • S14 filament LED lamps, included, with E26 service sockets
  • 40 lumens per lamp; about 960 lumens across 48 ft.
  • 1 W per lamp: a 48 ft. strand totals just 24 W
  • Up to 12 strands end to end from one outlet
  • Wet-location listed for year-round outdoor runs
  • Impact-resistant lamps shrug off drops and knocks
  • Heavy-duty 18/2 SJTW cord in black or white
  • 24 in. socket spacing for even cafe rhythm

Specification Table

Lengths 24 ft. (12 lamps) or 48 ft. (24 lamps)
Lamp S14 filament LED, included
Output 40 lumens per lamp
Appearance Warm white typical, confirmed at quote review
Input watts 1 W per lamp
Socket E26 medium
Socket spacing 24 in.
Lead / tail 18 in. lead, 6 in. tail
End to end Up to 12 strands from one outlet
Cord 18/2 SJTW, black or white
Location Wet-location listed
Power 120V plug-in

Included Components

  • Patio light strand with S14 filament LED lamps installed
  • 2 spare lamps with the 48 ft. strand

Installation Notes

  • Hang from hooks, eye lags, or a guide wire; support the cord every strand section rather than pulling it taut.
  • Plug into a GFCI-protected 120V outdoor outlet per local code.
  • Run up to 12 strands end to end from one outlet.
  • Replacement lamps are standard E26 S14 filament LEDs; keep spares from the 48 ft. pack.
  • Wet-location listed; leave installed through rain and snow seasons.

Warranty and Support

  • 2-year limited warranty program; terms confirmed at quote review
  • Replacement lamp path confirmed at quote review
  • Layout support for long terrace runs at quote review

Frequently Asked Questions

How do I hang it?
Use cup hooks, eye lags, or a tensioned guide wire above the run and clip or tie the cord at each socket bay. Support the cord itself rather than stretching it tight between two points.

Can it stay out all year?
Yes. The strand is wet-location listed with a weather-resistant SJTW cord and impact-resistant lamps, so it stays up through rain and snow seasons on a GFCI-protected circuit.

How many strands can I connect?
Up to 12 end to end from a single 120V outlet, thanks to the 1 W per lamp draw. That is over 570 ft. of continuous cafe light from one plug.

Are the lamps replaceable?
Yes. Sockets are standard E26 medium, lamps are S14 filament LEDs, and the 48 ft. strand ships with 2 spares in the box.

Documents

Download the available product documents below. If a document is not linked yet, use the SKU during quote review.

Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.

Support and request quote workflows stay available throughout specification and order planning.