Lumber God 2x4 SYP No. 1 Dimensional Lumber, Kiln Dried
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This platform covers the 2x4 section in 8 ft, 10 ft, 12 ft, 16 ft lengths. SYP is the structural workhorse of southern framing yards: heavy, strong, and stiff underfoot. Graded No. 1, with tighter knot and grain restrictions than No. 2 for spec driven jobs and spans near the edge of the tables. A nominal 2x4 finishes at an actual 1.5 in. x 3.5 in. after surfacing, and every length in this record shares that section, so takeoffs, plate layouts, and joist schedules carry across the full length run.
Highlights
- No. 1 SYP, graded under SPIB rules with an accredited agency grade stamp on every stick
- Kiln dried and heat treated (KD-HT) to 19 percent maximum moisture content
- Nominal 2x4 section, actual 1.5 in. x 3.5 in., consistent across all stocked lengths
- Available in 8 ft, 10 ft, 12 ft, 16 ft lengths as a single quoted platform
- S4S surfacing with eased edges for safe handling and clean fastening
- Suited to wall framing, top and bottom plates, blocking, and general construction
- Unit and bundle quantities quoted by count, with jobsite delivery coordinated at quote review
Specification Table
| Species group | Southern Yellow Pine (SYP) |
| Grade | No. 1 |
| Grading rules | SPIB, accredited agency grade stamp on every piece |
| Moisture class | KD-HT, kiln dried and heat treated, 19 percent max moisture content |
| Nominal size | 2 in. x 4 in. |
| Actual size | 1.5 in. x 3.5 in. |
| Lengths | 8 ft, 10 ft, 12 ft, 16 ft |
| Surfacing | S4S, eased edges |
| Treatment | Untreated |
| Approximate weight | 1.28 lb per linear ft (8 ft stick about 10.2 lb) |
| Typical applications | Wall framing, top and bottom plates, blocking, and general construction |
What Is Included
- SYP No. 1 dimensional lumber in the quoted length and count
- Accredited agency grade stamp on every piece
- Bundle or unit packaging per the quoted quantity
Handling and Installation Notes
- Confirm framing layout, member counts, and length mix against the plans before release.
- Store lumber flat, off the ground, and covered; allow site acclimation before close-in inspection.
- Use fastener sizes and schedules required by the applicable building code for structural framing.
- Crown members during layout; cull or crosscut sticks with excessive wane or splits at end use.
- Untreated SYP is for interior and protected exterior use; specify pressure treated stock for ground contact or weather exposed assemblies.
Warranty and Support
- Graded and stamped under published grading rules; grade claims follow the stamped agency standard
- Count shortages and transit damage are reconciled through quote review support after delivery
- Final counts, configuration, and delivery windows are confirmed during quote review
Frequently Asked Questions
What is the actual size of a 2x4?
A nominal 2x4 finishes at 1.5 in. x 3.5 in. after surfacing. Every length on this platform shares that actual section.
When should I specify No. 1 over No. 2 SYP?
Choose No. 1 when the plans call for higher bending values, tighter knot restrictions, or spans near the limit of the tables. For general framing, the No. 2 platform is the economical standard.
Can I use it outdoors?
Untreated SYP is intended for interior and protected exterior framing. For ground contact or weather exposed assemblies, use the pressure treated platforms in this catalog.
How is it sold?
By the stick in the length you select, quoted by count. Unit and bundle quantities are priced at quote review.
Documents
- Type Dimensional Lumber
- SKU LG-LBR-SYP1-2X4-8FT
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.