Lumber God 2x6 SPF No. 2 Dimensional Lumber, Kiln Dried
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This platform covers the 2x6 section in 8 ft, 10 ft, 12 ft, 16 ft lengths. Spruce-Pine-Fir stays straight, takes fasteners without splitting, and keeps wall lines true. Graded No. 2, the standard structural grade for framing where strength and economy balance. A nominal 2x6 finishes at an actual 1.5 in. x 5.5 in. after surfacing, and every length in this record shares that section, so takeoffs, plate layouts, and joist schedules carry across the full length run.
Highlights
- No. 2 and Better SPF, graded under NLGA rules with an accredited agency grade stamp on every stick
- Kiln dried and heat treated (KD-HT) to 19 percent maximum moisture content
- Nominal 2x6 section, actual 1.5 in. x 5.5 in., consistent across all stocked lengths
- Available in 8 ft, 10 ft, 12 ft, 16 ft lengths as a single quoted platform
- S4S surfacing with eased edges for safe handling and clean fastening
- Suited to tall wall framing, deck framing, and roof assemblies that need extra section depth
- Unit and bundle quantities quoted by count, with jobsite delivery coordinated at quote review
Specification Table
| Species group | Spruce-Pine-Fir (SPF) |
| Grade | No. 2 and Better |
| Grading rules | NLGA, accredited agency grade stamp on every piece |
| Moisture class | KD-HT, kiln dried and heat treated, 19 percent max moisture content |
| Nominal size | 2 in. x 6 in. |
| Actual size | 1.5 in. x 5.5 in. |
| Lengths | 8 ft, 10 ft, 12 ft, 16 ft |
| Surfacing | S4S, eased edges |
| Treatment | Untreated |
| Approximate weight | 1.55 lb per linear ft (8 ft stick about 12.4 lb) |
| Typical applications | Tall wall framing, deck framing, and roof assemblies that need extra section depth |
What Is Included
- SPF No. 2 dimensional lumber in the quoted length and count
- Accredited agency grade stamp on every piece
- Bundle or unit packaging per the quoted quantity
Handling and Installation Notes
- Confirm framing layout, member counts, and length mix against the plans before release.
- Store lumber flat, off the ground, and covered; allow site acclimation before close-in inspection.
- Use fastener sizes and schedules required by the applicable building code for structural framing.
- Crown members during layout; cull or crosscut sticks with excessive wane or splits at end use.
- Untreated SPF is for interior and protected exterior use; specify pressure treated stock for ground contact or weather exposed assemblies.
Warranty and Support
- Graded and stamped under published grading rules; grade claims follow the stamped agency standard
- Count shortages and transit damage are reconciled through quote review support after delivery
- Final counts, configuration, and delivery windows are confirmed during quote review
Frequently Asked Questions
What is the actual size of a 2x6?
A nominal 2x6 finishes at 1.5 in. x 5.5 in. after surfacing. Every length on this platform shares that actual section.
Is this stock kiln dried?
Yes. This is KD-HT stock, kiln dried and heat treated to 19 percent maximum moisture content, and stamped accordingly.
Can I use it outdoors?
Untreated SPF is intended for interior and protected exterior framing. For ground contact or weather exposed assemblies, use the pressure treated platforms in this catalog.
How is it sold?
Stick by stick in your chosen length; bundle and unit pricing lands during quote review.
Documents
- Type Dimensional Lumber
- SKU LG-LBR-SPF2-2X6-8FT
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.