Lumber God 2x8 Pressure Treated Lumber, Ground Contact
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This platform covers the treated 2x8 in 8 ft, 10 ft, 12 ft, 16 ft lengths. Because the platform is ground contact rated, it covers posts in soil, ledgers near grade, and framing over concrete without a second treatment class on the truck. A nominal 2x8 finishes at an actual 1.5 in. x 7.25 in. at time of manufacture; treated stock ships wet and should be allowed to season before finishing.
Highlights
- Ground contact rated per AWPA Use Category UC4A
- Treated Hem-Fir with the preservative system and retention on the stamped end tag
- Nominal 2x8, actual 1.5 in. x 7.25 in. at time of manufacture
- Available in 8 ft, 10 ft, 12 ft, 16 ft lengths as a single quoted platform
- Suited to floor joists, headers, and deck frames at moderate spans
- Use hot-dip galvanized or stainless steel fasteners and connectors rated for treated lumber
- Unit and bundle quantities quoted by count, with jobsite delivery coordinated at quote review
Specification Table
| Species group | Hem-Fir, pressure treated |
| Grade | No. 2 |
| Treatment class | Ground contact, AWPA Use Category UC4A |
| Preservative | Copper based waterborne preservative; system and retention per stamped end tag |
| Nominal size | 2 in. x 8 in. |
| Actual size | 1.5 in. x 7.25 in. at time of manufacture |
| Lengths | 8 ft, 10 ft, 12 ft, 16 ft |
| Moisture | Treated after surfacing; ships wet, season before finishing |
| Approximate weight | 3.17 lb per linear ft (8 ft piece about 25.4 lb, treated wet) |
| Fasteners | Hot-dip galvanized or stainless steel rated for treated lumber |
| Typical applications | Floor joists, headers, and deck frames at moderate spans |
What Is Included
- Ground contact treated Hem-Fir in the quoted length and count
- Stamped end tag with treatment class and retention on every piece
- Bundle or unit packaging per the quoted quantity
Handling and Installation Notes
- Use hot-dip galvanized or stainless steel fasteners and connectors rated for treated lumber.
- Never burn treated offcuts; dispose of scrap per local requirements and wear a dust mask when cutting.
- Field-treat cut ends with a copper naphthenate end-cut preservative to maintain the protection envelope.
- Treated stock ships wet; allow seasoning before applying paint or stain and expect minor shrinkage.
- Confirm post embedment, hardware schedule, and drainage details against the plans during quote review.
Warranty and Support
- Graded and stamped under published grading rules; grade claims follow the stamped agency standard
- Count shortages and transit damage are reconciled through quote review support after delivery
- Final counts, configuration, and delivery windows are confirmed during quote review
Frequently Asked Questions
What does ground contact rated mean?
The treatment retention meets AWPA Use Category UC4A, so the piece is approved for direct soil or standing water contact, on-grade framing, and other hard service locations, as well as everything above grade.
Which fasteners should I use?
Hot-dip galvanized or stainless steel fasteners and connectors rated for treated lumber. Standard bright fasteners corrode in contact with the preservative.
Can I paint or stain it right away?
No. Treated stock ships wet. Allow it to season until water no longer beads on the surface, typically several weeks exposed, before applying finish.
What is the actual size of a treated 2x8?
1.5 in. x 7.25 in. at time of manufacture. Treated lumber can vary slightly with moisture content as it seasons.
Documents
- Type Pressure Treated Lumber
- SKU LG-LBR-PT-2X8-8FT
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.