Lumber God Base Shoe Molding, 1/2 x 3/4 in, 8 ft
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
The profile is Base shoe, 1/2 in. thick x 3/4 in. tall. Material by finish: Solid pine (stain grade) or primed finger joint pine. Trim is quoted by the stick and bundled for protection in transit; profile continuity within an order is maintained by quoting full runs from a single production lot. Lengths: 8 ft.
Highlights
- Profile: Base shoe, 1/2 in. thick x 3/4 in. tall
- Material: Solid pine (stain grade) or primed finger joint pine
- Lengths: 8 ft
- Application: covers the expansion gap between baseboard and finished flooring
- Straight, storage-protected sticks quoted by count
- Profile continuity maintained within each quoted run
Specification Table
| Product class | Shoe Molding |
| Profile | Base shoe, 1/2 in. thick x 3/4 in. tall |
| Material | Solid pine (stain grade) or primed finger joint pine |
| Lengths | 8 ft |
| Finish | Stain Grade Pine, Primed White |
| Application | Covers the expansion gap between baseboard and finished flooring |
| Sold by | Stick, quoted by count and full-room bundles |
What Is Included
- Finish trim sticks in the quoted profile, finish, and count
- Bundled packaging per the quoted quantity
- Installation and finishing documents linked on this page
Handling and Installation Notes
- Acclimate sticks flat in conditioned space before installation.
- Fasten with finish nails or 18 gauge brads into framing members; set and fill heads.
- Cope inside corners on shaped profiles; miter outside corners with glued joints.
- Use scarf joints over framing on long runs and stagger them away from sight lines.
- Caulk to the wall and paint promptly on primed stock; seal all edges of MDF profiles.
Warranty and Support
- Profile and material claims follow the published product documents
- Shortages and transit damage are reconciled through quote review support after delivery
- Final stick counts, finish selection, and delivery windows are confirmed during quote review
Frequently Asked Questions
Primed or stain grade, which should I order?
Primed stock is paint ready and hides joints under caulk and enamel. Stain grade is continuous clear material for transparent finishes. Choose per the finish schedule; both are quoted per stick.
How should trim be stored on site?
Flat, bundled, and in conditioned space. Acclimate before installation and keep primed stock dry until painted.
How do I estimate quantity?
Measure wall or opening runs, add cuts and waste (typically 10 percent, more with many corners), and round up to full sticks. Take-off support is available during quote review.
What fasteners are used?
Finish nails or 18 gauge brads into framing, with adhesive on masonry or metal stud conditions per the installation document.
Documents
- Type Shoe Molding
- SKU LG-LBR-TRM-SHOE-PINE
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.