Namimera 2-in-1 Shower Faucet with Detachable Hand Shower, Valve Included, 1.75 GPM, Matte Black
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a wall-mount 2-in-1 shower faucet with an included universal rough-in valve, a detachable hand shower, four spray settings with pause, and 1.75 GPM WaterSense flow, helping plumbing crews and property teams move from review to release with fewer scope gaps.
Highlights
- Complete unit: 2-in-1 trim, hand shower, and universal rough-in valve
- Detachable hand shower runs separately from or together with the fixed head
- 4 spray settings: full body, shampoo rinse, drenching rain, and pause
- Pressure-balancing cartridge protects against sudden temperature swings
- Pause setting trickles flow for lathering and pet bathing tasks
- 1/2 in. IPS connections fit standard US rough-ins
- 1.75 GPM maximum flow at 80 psi, WaterSense labeled, ADA compliant
- Matte black finish for contemporary bath programs
Specification Table
| Valve type | Pressure balance, anti-scald cycle cartridge |
| Valve included | Yes, universal rough-in valve in box |
| Flow rate | 1.75 GPM at 80 psi |
| Spray settings | 4: full body, shampoo rinse, drenching rain, pause |
| Head | 2-in-1 fixed head with detachable hand shower |
| Docking | Hand shower docks in the head; outlets run separate or combined |
| Connection | 1/2 in. IPS |
| Mounting | Wall mount |
| Body material | Brass |
| Finish | Matte black |
| Certifications | WaterSense, ADA |
| Warranty | Lifetime limited, residential installations |
Included Equipment
- Universal pressure-balancing rough-in valve
- Valve trim with single lever handle and escutcheon
- 2-in-1 shower head with detachable hand shower and hose
- Shower arm and flange
- Installation instructions
Installation Notes
- Shut off supplies and verify 1/2 in. IPS rough-in alignment before setting the valve body.
- Set the valve depth to the finished wall using the plasterguard as the gauge.
- Adjust the hot limit stop at commissioning to the maximum hot water the project allows.
- Rough-in and final connection should be completed by a qualified, licensed plumber.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: lifetime limited warranty for residential installations
- Replacement cartridges, hoses, and docking parts are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review.
Frequently Asked Questions
Is the rough-in valve included?
Yes. The unit ships with the universal pressure-balancing rough-in valve along with the 2-in-1 trim and hand shower.
Can the fixed head and hand shower run at the same time?
Yes. The hand shower detaches from the head center and runs separately or simultaneously with the fixed spray.
Is the flow rate code-compliant?
The published specification summary lists 1.75 GPM at 80 psi with a WaterSense label. Local code requirements should be confirmed during quote review.
What should be confirmed before ordering?
Rough-in condition, hose reach for the intended users, and the finish selection are confirmed during quote review.
Documents
- Type Shower Faucet Set
- SKU NM-PLB-SV-PB2N1-MB-MB
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.