Namimera 30 in. Undermount 16-Gauge Stainless Steel Single Bowl Kitchen Sink
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a 16-gauge 304 stainless steel undermount single bowl kitchen sink in 30 in. and 32 in. widths with a 10 in. bowl depth, a rear-set 3-1/2 in. drain, and sound-deadening pads, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- Heavy 16-gauge 304 stainless steel body resists dents and corrosion
- Deep 10 in. single bowl handles stockpots and sheet pans laid flat
- Rear-set 3-1/2 in. drain opening preserves usable cabinet space below
- Sound-deadening pads and insulating undercoating quiet dish and disposal noise
- Sloped bottom with channel grooves moves water toward the drain
- Available in 30 in. and 32 in. widths with fitted bottom grids
- cUPC listed to ASME A112.19.3 and CSA B45.4
Specification Table
| Overall dimensions (30 in.) | 30 x 18 x 10.5 in. |
| Overall dimensions (32 in.) | 32 x 19 x 10.5 in. |
| Bowl dimensions (30 in.) | 28 x 16 x 10 in. |
| Bowl dimensions (32 in.) | 30 x 17 x 10 in. |
| Bowl configuration | Single bowl |
| Material | 16-gauge 304 stainless steel, satin finish |
| Mounting | Undermount; cutout template and hardware included |
| Drain | 3-1/2 in. opening, rear-set placement |
| Minimum cabinet size | 33 in. for the 30 in. sink; 36 in. for the 32 in. sink |
| Sound treatment | Sound-deadening pads with insulating undercoating |
| Certifications | cUPC listed (ASME A112.19.3, CSA B45.4) |
| Warranty | Limited lifetime warranty |
Included Equipment
- Stainless steel sink body
- Protective stainless steel bottom grid
- Drain assembly with removable basket strainer
- Undermount mounting hardware
- Cutout template
- Installation and care guide
Installation Notes
- Verify base cabinet width before ordering: the 30 in. sink requires a 33 in. minimum cabinet and the 32 in. sink requires a 36 in. minimum cabinet.
- Undermount installation requires countertop fabrication with the supplied cutout template; coordinate the reveal preference with the fabricator.
- Confirm drain rough-in height and any garbage disposal clearance before setting the sink.
- Final drain and supply connections should be completed by a qualified, licensed plumber.
- Review the final size selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime warranty on the sink body and finish
- Replacement bottom grids and basket strainer components are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Which size fits my cabinet?
The 30 in. sink fits a 33 in. minimum base cabinet and the 32 in. sink fits a 36 in. minimum base cabinet. Cabinet fit is confirmed during quote review.
How deep is the bowl?
Both widths carry a 10 in. deep single bowl with a rear-set 3-1/2 in. drain opening.
Is a bottom grid included?
Yes. A fitted stainless steel bottom grid and a drain assembly with removable basket strainer ship with both sizes.
Is the sink code-listed?
The published specification summary lists cUPC certification to ASME A112.19.3 and CSA B45.4. Local code requirements should be confirmed during quote review.
Documents
- Type Undermount Kitchen Sink
- SKU NM-PLB-SK-UM30-SS-30
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.