Namimera 33 in. Drop-In 50-50 Double Bowl 20-Gauge Stainless Steel Kitchen Sink
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a 33 x 22 x 8 in. drop-in kitchen sink in 20-gauge stainless steel with 50-50 double bowls, 4 deck holes, 3-1/2 in. drains, a sound-dampening undercoat, and an included cut-out template, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- Two 14 x 16 in. bowls at a full 8 in. depth
- 20-gauge type-304 stainless steel with a brushed finish
- Full undercoating cuts noise and condensation buildup
- 3-1/2 in. center-position drain openings
- 4 pre-drilled deck holes for a faucet, sprayer, or dispenser
- Mounting hardware and cut-out template included
- Top-mount clips fit countertops 0.47 to 1.5 in. thick
- IAPMO certified
Specification Table
| Overall dimensions | 33 x 22 x 8 in. |
| Bowl dimensions (each) | 14 x 16 x 8 in. |
| Bowl configuration | 50-50 double bowl |
| Gauge | 20-gauge type-304 stainless steel, brushed |
| Faucet holes | 4 pre-drilled |
| Drain | 3-1/2 in. openings, center placement |
| Minimum cabinet size | 36 in. |
| Mounting | Top mount; clips fit countertops 0.47 to 1.5 in. thick |
| Sound treatment | Full sound-dampening undercoating |
| Included | Mounting hardware and cut-out template |
| Certifications | IAPMO certified |
| Warranty | Limited lifetime warranty |
Included Equipment
- Stainless steel sink body, 50-50 double bowl
- 12 top-mount clips and mounting hardware
- Cut-out template
- Use and care guide
Installation Notes
- Confirm the 36 in. minimum base cabinet and cut the countertop with the included template; drill pilot holes at the corners and support the cutout while sawing.
- Space top-mount clips per the guide, about 3 in. from each end and evenly along the sides; clips fit countertops 0.47 to 1.5 in. thick.
- Apply a continuous silicone bead around the cutout before setting the sink; metal edges are sharp, so handle with gloves.
- Final drain and supply connections should be completed by a qualified, licensed plumber.
- Review the final configuration and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime warranty on the sink body
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Is a cutout template included?
Yes. The sink ships with a cut-out template and top-mount hardware, so the countertop opening can be cut without tracing the rim.
How does 20-gauge compare with thinner sinks?
The published specification summary lists 20-gauge type-304 stainless steel, a thicker body than 22-gauge economy sinks, and the bowls run a full 8 in. deep.
Can a garbage disposal be installed?
The sink uses standard 3-1/2 in. center drain openings. Disposal compatibility and support requirements are confirmed during quote review.
How many faucet holes are pre-drilled?
Four, sized for a faucet plus a sprayer, soap dispenser, or other accessory, all ordered separately.
Documents
- Type Drop-In Kitchen Sink
- SKU NM-PLB-SK-DI3320-SS-SS
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.