Namimera 33 in. Drop-In Double Bowl 18-Gauge Stainless Steel Kitchen Sink with 4 Faucet Holes
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a 33 x 22 x 9-1/4 in. drop-in kitchen sink in premium 18-gauge stainless steel with double equal 9 in. bowls, 4 deck holes, a 3-5/8 in. drain hole, and a 36 in. minimum cabinet, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- Double equal bowls, each 14-3/16 x 15-11/16 in. at 9 in. deep
- Premium 18-gauge stainless steel body
- Sound-absorption treatment quiets disposal and dish noise
- 3 faucet holes at 4 in. spacing plus a right-hand accessory hole
- Low-profile rim sweeps crumbs and liquid straight into the sink
- 3-5/8 in. drain holes with installation hardware included
- ASME A112.19.3/CSA B45.4
Specification Table
| Overall dimensions | 33 x 22 x 9-1/4 in. |
| Bowl dimensions (each) | 14-3/16 x 15-11/16 x 9 in. |
| Bowl configuration | Double equal |
| Gauge | Premium 18-gauge stainless steel |
| Faucet holes | 4 deck holes: 3 at 4 in. spacing + 1 accessory, 1-7/16 in. dia. |
| Drain hole | 3-5/8 in. |
| Minimum base cabinet | 36 in. |
| Sound treatment | Sound-absorption system |
| Mounting | Top mount, low-profile rim |
| Included | Installation hardware |
| Standards | ASME A112.19.3/CSA B45.4 |
| Warranty | Lifetime limited warranty |
Included Equipment
- Stainless steel sink body, double equal bowls
- Installation hardware
Installation Notes
- Confirm the 36 in. minimum base cabinet and verify the cutout against the rim before sawing.
- Deck holes are 1-7/16 in. at 4 in. spacing with one accessory hole to the right; match the faucet trim before installation.
- Bowls run 9 in. deep; check disposal clearance and trap height during rough-in.
- Final drain and supply connections should be completed by a qualified, licensed plumber.
- Review the final configuration and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: lifetime limited warranty on stainless steel sinks
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
What does 18-gauge mean for durability?
Lower gauge numbers mean thicker steel. The published specification summary lists premium 18-gauge stainless steel, a heavier body than common 20- and 22-gauge sinks.
Will a 4 in. faucet layout fit?
Yes. The deck carries 3 faucet holes at 4 in. spacing plus one accessory hole to the right, each 1-7/16 in. in diameter.
What drain assembly does it take?
The drain holes are 3-5/8 in.; strainers and drain assemblies are ordered separately and confirmed during quote review.
Is the sink code-listed?
The published specification summary lists ASME A112.19.3/CSA B45.4. Local code requirements should be confirmed during quote review.
Documents
- Type Drop-In Kitchen Sink
- SKU NM-PLB-SK-DI3318-SS-SS
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.