Namimera 33 in. Drop-In 18-Gauge Stainless Steel Kitchen Sink
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a 33 x 22 x 9 in. drop-in stainless steel kitchen sink in single bowl or 50-50 double bowl configurations with 2 pre-drilled deck holes, sound-deadening pads, and included bottom grids and strainers, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- One 33 x 22 in. body in single bowl or 50-50 double bowl layouts
- Corrosion-resistant 18-gauge 304 stainless steel with brushed finish
- 9 in. deep bowls with matching bottom grids and basket strainers
- Dual-mount rim drops into a cutout or undermounts with fabricator clips
- 2 pre-drilled deck holes accept a faucet and soap dispenser
- Sound-deadening pads reduce water and disposal noise
- IAPMO certified
Specification Table
| Overall dimensions | 33 x 22 x 9 in. |
| Bowl dimensions (single) | 29.52 x 16.25 x 9 in. |
| Bowl dimensions (50-50 double) | Two bowls, each 14.25 x 16.25 x 9 in. |
| Bowl configuration | Single bowl or 50-50 double bowl |
| Material | 18-gauge 304 stainless steel, brushed finish |
| Mounting | Dual-mount; top-mount clips included for 0.47 to 1.5 in. countertops |
| Faucet holes | 2 pre-drilled deck holes |
| Drain | 3-1/2 in. openings; center on single bowl, rear on double bowl |
| Minimum cabinet size | 36 in. |
| Sound treatment | Sound-deadening pads |
| Certifications | IAPMO certified |
| Warranty | Limited lifetime warranty |
Included Equipment
- Stainless steel sink body in the selected bowl configuration
- Fitted stainless steel bottom grid per bowl
- Basket strainer per bowl
- Top-mount installation clips and hardware
- Installation template and guide
Installation Notes
- Verify the 36 in. minimum base cabinet and confirm the countertop cutout against the supplied template before cutting.
- Top-mount clips fit countertops 0.47 to 1.5 in. thick; undermount installation requires separate undermount clips from the countertop fabricator.
- Seal the rim with a continuous silicone bead during setting to prevent water migration under the deck.
- Final drain and supply connections should be completed by a qualified, licensed plumber.
- Review the final bowl configuration and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime warranty on the sink body and finish
- Replacement grids and strainer components are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Should I pick the single bowl or the 50-50 double bowl?
The single bowl gives one uninterrupted 29.52 in. basin for large cookware; the 50-50 double bowl splits the same footprint into two 14.25 in. basins for wash and rinse zones. The configuration is confirmed during quote review.
How many faucet holes are pre-drilled?
Two deck holes, sized for a kitchen faucet and a soap dispenser or side accessory.
Can this sink be undermounted?
The body is dual-mount. Top-mount clips are included; undermounting requires separate undermount clips, typically supplied by the countertop fabricator.
Is the sink code-listed?
The published specification summary lists IAPMO certification. Local code requirements should be confirmed during quote review.
Documents
- Type Drop-In Kitchen Sink
- SKU NM-PLB-SK-DI33-SS-SB
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.