Namimera 56 to 60 in. W x 76 in. H Frameless-Look Bypass Sliding Shower Door with Clear Glass, Matte Black
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This designer-ready product summary covers a 56 to 60 in. x 76 in. bypass shower door with 5/16 in. ANSI-certified coated tempered glass, a 23-1/2 to 27-1/2 in. walk-in opening, 4 in. of width trim, and 3/8 in. per-side out-of-plumb allowance, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- Fits finished openings 56 to 60 in. wide at 76 in. height
- 5/16 in. (8 mm) ANSI-certified clear tempered glass
- Frameless glass look on slim anodized aluminum rails
- Factory-applied water and stain resistant glass coating
- Double sliding bypass panels enter from either side
- Trims up to 4 in. for width; 3/8 in. out-of-plumb allowance per side
- Two towel bars double as handles
- Matte black, brushed nickel, or oil rubbed bronze hardware
Specification Table
| Opening width range | 56 to 60 in. |
| Overall height | 76 in. |
| Glass | 5/16 in. (8 mm) ANSI-certified clear tempered, coated |
| Configuration | Double sliding bypass, reversible entry |
| Walk-in opening | 23-1/2 to 27-1/2 in. |
| Width adjustment | Up to 4 in. |
| Out-of-plumb allowance | Up to 3/8 in. per side |
| Rails | Anodized aluminum guide rails and wall profiles |
| Handles | Two towel bars |
| Finish | Matte black (brushed nickel and oil rubbed bronze available) |
| Warranty | Limited lifetime; 1-year on dark hardware finishes |
Included Equipment
- Two tempered glass bypass panels
- Anodized aluminum guide rails and wall profiles
- Rollers and roller guards
- Mounting hardware
- Installation guide
Installation Notes
- Measure the finished opening only after walls and threshold are complete; confirm width falls inside 56 to 60 in.
- Rails can be trimmed up to 4 in. with a hacksaw or miter saw; deburr cut edges before assembly.
- Anchor wall profiles plumb; the profiles absorb up to 3/8 in. out-of-plumb per side.
- Glass panels are heavy; stage a two-person lift or glass suction cups for hanging, and never lift by the towel bars.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime manufacturer warranty, with 1-year finish coverage on matte black and oil rubbed bronze hardware
- Replacement rollers, guides, and seals are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Will it fit my opening?
The door fits finished openings between 56 and 60 in. wide at 76 in. tall, with up to 4 in. of rail trim. Confirm measurements after wall finishes are complete.
How is this different from a framed slider?
The glass edges run exposed for a frameless look, carried on slim anodized guide rails rather than a full perimeter frame.
Is the glass safety rated?
The published specification summary lists 5/16 in. ANSI-certified tempered glass. Code documentation needs are confirmed during quote review.
What should be confirmed before ordering?
Finished opening width, wall plumb condition, and the hardware finish are confirmed during quote review.
Documents
- Type Sliding Shower Door
- SKU NM-PLB-SD-BP60-MB-MB
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.