Namimera 56 to 60 in. W x 76 in. H Semi-Frameless Sliding Shower Door with Clear Glass, Brushed Nickel
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This designer-ready product summary covers a 56 to 60 in. x 76 in. semi-frameless bypass shower door with 5/16 in. coated tempered glass, a 23.25 to 27.25 in. walk-in opening, 4 in. of rail trim adjustment, and dual towel bar handles, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- Fits finished openings 56 to 60 in. wide at 76 in. height
- 5/16 in. (8 mm) certified clear tempered glass
- Factory-applied water and stain resistant glass coating
- Double sliding bypass panels enter from either side
- Guide rails trim up to 4 in. for width adjustment
- Water guards absorb up to 1/4 in. out-of-plumb per side
- Dual towel bars double as full-width handles
- Brushed nickel, chrome, or matte black hardware
Specification Table
| Opening width range | 56 to 60 in. |
| Overall height | 76 in. |
| Glass | 5/16 in. (8 mm) certified clear tempered, coated |
| Configuration | Double sliding bypass, reversible entry |
| Walk-in opening | 23.25 to 27.25 in. W x 71.25 in. H |
| Width adjustment | Rails trim up to 4 in. |
| Out-of-plumb allowance | Up to 1/4 in. per side |
| Threshold requirement | 2-3/4 in. minimum flat level depth |
| Handles | Dual towel bars |
| Finish | Brushed nickel (chrome and matte black available) |
| Warranty | Limited lifetime; 3-year hardware finish |
Included Equipment
- Two tempered glass bypass panels
- Upper guide rail and bottom rail, pre-cut for the model size
- Wall profiles and water guards
- Rollers, guide block, and mounting hardware
- Installation guide
Installation Notes
- Measure the finished opening only after walls and threshold are complete; confirm width falls inside 56 to 60 in. and the threshold offers at least 2-3/4 in. of flat level depth.
- Drilling into the threshold is required; plan fastener locations before setting rails.
- Anchor wall brackets into studs or solid blocking and check plumb; water guards absorb up to 1/4 in. per side.
- Glass panels are heavy; stage a two-person lift or glass suction cups for hanging.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime manufacturer warranty with a 3-year warranty on hardware finishes
- Replacement rollers, guides, and seals are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Will it fit my opening?
The door fits finished openings between 56 and 60 in. wide at 76 in. tall, and the rails can be trimmed up to 4 in. Confirm measurements after wall finishes are complete.
Which side does it open from?
Both. The double sliding bypass design lets bathers enter from the left or right side.
Is the glass safety rated?
The published specification summary lists 5/16 in. certified tempered glass. Code documentation needs are confirmed during quote review.
What should be confirmed before ordering?
Finished opening width, threshold depth and levelness, and the hardware finish are confirmed during quote review.
Documents
- Type Sliding Shower Door
- SKU NM-PLB-SD-SF60-BN-BN
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.