Namimera Commercial-Style Touchless Pull-Down Kitchen Faucet, 1.8 GPM, Stainless
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This designer-ready product summary covers a commercial-style touchless pull-down faucet with 1.8 GPM flow at 60 psi, an 18.75 in. overall height that clears standard upper cabinets, an 8.63 in. spout reach, a 35 mm ceramic cartridge, and a 3-minute auto shutoff, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- 1.8 GPM flow at 60 psi with two-function spray head
- Side-mounted sensor prevents accidental activation while dishwashing
- 3-minute automatic shutoff protects against water waste
- Compact 18.75 in. commercial height fits under standard uppers
- Coin-slot switch converts the faucet to fully manual operation
- Brass body with 180 degree swivel and flexible open-coil spout
- Pre-attached waterlines, control box, batteries, and hardware included
- ADA compliant; certified to ASME A112.18.1/CSA B125.1
Specification Table
| Flow rate | 1.8 GPM at 60 psi |
| Activation | Side sensor with handle-open interlock, 3-minute auto shutoff |
| Valve cartridge | 35 mm ceramic cartridge |
| Spray modes | Aerated stream and spray |
| Overall height | 18.75 in. |
| Spout height | 6.25 in. to spout outlet |
| Spout reach | 8.63 in. from base center |
| Spout swivel | 180 degrees |
| Mounting | Single hole, decks up to 3.375 in. thick |
| Body material | Brass body, ABS spray head, braided nylon waterways |
| Supply connections | 3/8 in. compression, 36 in. integrated lines |
| Warranty | Limited lifetime warranty |
Included Equipment
- Commercial-style faucet body with two-function spray head
- 36 in. pre-attached braided nylon waterlines
- Sensor control box with battery housing and four AA batteries
- Hose weight, weight clip, and quick-connect assembly
- Mounting hardware and hex wrench
- Installation guide
Installation Notes
- Confirm single-hole layout and deck thickness up to 3.375 in. before install; this model does not include a deck plate.
- Shut off supplies and verify 3/8 in. compression stops before removing the existing fixture.
- Mount the control box and battery pack on the cabinet wall, keeping the sensor cable clear of the spray hose travel.
- Flush the lines through the removed spray head after install to clear debris, then check for leaks.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime warranty on the faucet and finish
- Replacement spray heads, cartridges, control boxes, and flow restrictors are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Can the sensor be turned off?
Yes. A coin-slot switch on the control box converts the faucet to fully manual operation, and the lever handle always works as a standard faucet control.
Will it fit under my upper cabinets?
The overall height is 18.75 in., which fits below most standard uppers set 18 to 20 in. above the counter. Verify your clearance during quote review.
What finishes are available?
Spot-free stainless and matte black. The finish for the final order is confirmed during quote review.
Is the flow rate code-compliant?
The published specification summary lists 1.8 GPM at 60 psi. Local code requirements should be confirmed during quote review.
Documents
- Type Touchless Kitchen Faucet
- SKU NM-PLB-KF-PDS18-SS-SS
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.