Namimera Commercial Touchless Bathroom Faucet with Thermostatic Shut-Off, 0.5 GPM, Polished Chrome
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This facility-ready product summary covers an AC-powered touchless single-hole lavatory faucet with 0.5 GPM vandal-resistant multi-laminar spray, ASSE 1070 thermostatic shut-off, a 6.62 in. spout with 5.5 in. reach, and above-deck mixing, helping facility programs move from review to release with fewer scope gaps.
Highlights
- Touchless proximity operation limits germ spread in public restrooms
- 0.5 GPM pressure-compensating, vandal-resistant multi-laminar spray
- Integral thermostatic safety shut-off, ASSE 1070 certified
- Above-deck mixing with removable handle and adjustable hot limit stop
- All electronics in the spout; no control box below deck
- Fail-safe solenoid closes automatically on power loss
- Automatic periodic purge cycle flushes stagnant water
- AC power kit quoted separately: plug-in, hard-wired, or battery options
Specification Table
| Flow rate | 0.5 GPM pressure-compensating spray |
| Activation | Proximity sensor, AC powered; power kit quoted separately |
| Safety shut-off | Integral thermostatic, ASSE 1070 certified |
| Mixing | Above-deck, removable handle, hot limit stop |
| Mounting | Single hole, vandal-resistant single post |
| Spout height | 6.62 in. deck to spout outlet |
| Spout reach | 5.5 in. from base center |
| Overall height | 7.5 in. |
| Water pressure range | 20 to 120 psi |
| Supply connections | Dual inlets, 24 in. flexible supplies, 3/8 in. compression |
| Max deck thickness | 1.5 in. |
| Certifications | ASSE 1070; lead content 0.25 percent or less |
| Warranty | 5-year limited warranty |
Included Equipment
- Touchless faucet body with integrated sensor and solenoid
- Removable above-deck mixing handle with cover plug
- Pre-installed 24 in. flexible inlet hoses with filter assemblies
- Check valves on dual inlets
- Mounting hardware; power kit and deck plate quoted separately
Installation Notes
- A power kit is required and not included; plug-in, hard-wired, and battery options are confirmed during quote review.
- Confirm a single-hole layout; optional deck plates cover 4 in. or 8 in. center layouts and are quoted separately.
- Water pressure must fall between 20 and 120 psi; verify stops and filters before install.
- The faucet installs from the top and all serviceable parts are accessible from above deck.
- Review the final configuration and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: 5-year limited warranty
- Replacement sensors, solenoids, filters, and mixing handles are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Is the power kit included?
No. The published configuration requires a separate power kit; plug-in AC, hard-wired AC, long-life battery, and battery backup options are confirmed during quote review.
What keeps users from getting scalded?
An integral thermostatic safety shut-off, certified to ASSE 1070, limits hot water temperature without a separate mixing valve.
Does it work during a power outage?
The solenoid closes automatically on power loss so the faucet fails safe and shut. An optional battery backup keeps AC-powered units running and is quoted separately.
Is it suitable for residential use?
It is a commercial-grade lavatory faucet; the published specification summary supports residential use where a 0.5 GPM public-restroom flow is acceptable.
Documents
- Type Touchless Bathroom Faucet
- SKU NM-PLB-BF-SHT05A-PC-PC
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.