Namimera Filtered 4-Spray Fixed Shower Head, 5.5 in. Face, 1.8 GPM, Brushed Nickel
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This designer-ready product summary covers a filtered 5.5 in. fixed shower head with a replaceable copper-zinc KDF-55 and calcium sulfite cartridge, four spray settings, 1.8 GPM flow, and a filter reminder dial, helping bath programs and property teams move from review to release with fewer scope gaps.
Highlights
- Built-in filtration is the headline: copper-zinc KDF-55 plus calcium sulfite media reduces chlorine, lead, mercury, iron, and hydrogen sulfide
- Each cartridge lasts up to 6 months or about 3,500 gallons
- Reminder dial on the head tracks the install month; no guesswork on swaps
- Tool-free release buttons swap cartridges without removing the head
- 4 spray settings: massage, spray, massage plus spray, and trickle
- 5.5 in. edge-to-edge nozzle field for full coverage
- 360 degree swivel ball aims the spray without tools
- 1.8 GPM maximum flow; brushed nickel or matte black finish
Specification Table
| Flow rate | 1.8 GPM max |
| Spray settings | 4: massage, spray, massage plus spray, trickle |
| Head size | 5.5 in. edge-to-edge sprayface |
| Filtration | Copper-zinc KDF-55 and calcium sulfite replaceable cartridge |
| Filter life | Up to 6 months or about 3,500 gallons |
| Filter service | Tool-free release buttons; month reminder dial |
| Swivel | 360 degree ball joint |
| Connection | 1/2 in. standard thread |
| Mounting | Wall mount, existing shower arm |
| Valve | Not included; existing shower valve reused |
| Finish | Brushed nickel (matte black available) |
Included Equipment
- Filtered fixed shower head with pre-installed cartridge
- Thread seal tape
- Installation instructions
Installation Notes
- Reuses the existing shower arm and valve; no in-wall work required.
- Apply the included thread seal tape to the arm threads and hand-tighten the collar at the back of the head.
- Set the reminder dial to the current month at installation, then flush warm water for at least one minute before first use.
- Replace the cartridge every 3 to 6 months depending on water quality and usage; light mineral dust from a new cartridge is normal and clears on flushing.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: confirmed during quote review before order release
- Replacement filter cartridges are supported as a reorder line through quote review
- Final warranty registration and coverage documents are confirmed during quote review.
Frequently Asked Questions
What does the filter actually reduce?
The copper-zinc KDF-55 and calcium sulfite media reduces chlorine, lead, mercury, iron, hydrogen sulfide, and other heavy metals reaching skin and hair.
How often does the cartridge need replacement?
Up to 6 months or about 3,500 gallons per cartridge; a reminder dial on the head tracks the install month, and swaps are tool-free.
Does it fit a standard shower arm?
Yes. The head uses the standard 1/2 in. thread found on US shower arms, wall or ceiling mounted.
What should be confirmed before ordering?
Finish selection, cartridge reorder cadence for the program, and arm condition are confirmed during quote review.
Documents
- Type Filtered Shower Head
- SKU NM-PLB-SH-FL55-BN-BN
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.