Namimera Fold-Down Teak Shower Seat, ADA Compliant, 400 lb Rated, Oil Rubbed Bronze Frame
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a wall-mounted fold-down shower seat with a 20 in. x 15 in. teak surface, manufacturer-stated 400 lb weight capacity and ADA-compliant design, and an aluminum frame in oil rubbed bronze, helping accessibility and bath programs move from review to release with fewer scope gaps.
Highlights
- Manufacturer-stated 400 lb weight capacity
- Complies with ADA specifications per the manufacturer's published data
- 20 in. wide x 15 in. deep slatted teak seating surface
- Folds flat against the wall to keep the shower footprint clear
- Naturally water-tolerant teak paired with a corrosion-resistant aluminum frame
- Oil rubbed bronze frame finish coordinates with warm fixture palettes
- Mounts with six included wood screws into studs or solid backing
- Recommended installed seat height of 15 in. to 21 in. from the shower floor
Specification Table
| Configuration | Wall-mounted fold-down shower seat |
| Seat dimensions | 20 in. W x 15 in. D |
| Weight capacity | 400 lb, manufacturer stated |
| Compliance | Complies with ADA specifications, manufacturer stated |
| Seat material | Teak |
| Frame material | Aluminum, oil rubbed bronze finish |
| Mounting | Six wood screws into studs or solid wood backing |
| Recommended seat height | 15 in. to 21 in. from shower floor |
| Product weight | 15.75 lb |
| Warranty | Limited lifetime warranty |
Included Equipment
- Fold-down shower seat with teak slats and aluminum frame
- Six wood mounting screws
- Installation instructions
Installation Notes
- All six mounting holes must land on wood studs or solid wood backing; do not fasten into fiberglass or acrylic surrounds alone.
- Set the seat level at an installed height of 15 in. to 21 in. from the shower floor per the published guidance.
- Professional installation is recommended; verify blocking before tile or surround close-in on new construction.
- Load-test the seat after installation before first use.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime warranty
- Teak care guidance and replacement hardware are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Is it rated for bariatric use?
The published specification summary lists a 400 lb weight capacity. Requirements above that rating should be raised during quote review.
Does it meet ADA requirements?
The manufacturer's published data states the seat complies with ADA specifications. Project-specific code review is confirmed during quote review.
What wall preparation is needed?
Six fastening points into wood studs or solid backing. New construction should add blocking at the planned seat height before close-in.
How is the teak maintained?
Wipe with a warm damp cloth; untreated teak weathers naturally, and periodic teak oil preserves the original tone.
Documents
- Type Shower Seat
- SKU NM-PLB-HW-ST-TK-TK
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.