Namimera Freestanding Tub Filler with Hand Shower and Supply Lines, Matte Black
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This designer-ready product summary covers a 39 in. floor-mount freestanding tub filler with pressure-balancing ceramic disc valve, 2.25 GPM spout and 1.6 GPM hand shower at 60 psi, 59 in. hose, included rough-in valve and supply lines, and solid brass build, helping bath programs move from review to release with fewer scope gaps.
Highlights
- Floor-mount freestanding design places the spout beside any freestanding tub
- Pressure-balancing valve holds water temperature when supply pressure suddenly drops
- 2.25 GPM spout and 1.6 GPM hand shower flow at 60 psi
- Single-function hand shower on a 59 in. hose; diverter auto-returns to spout
- Rough-in valve, adjustable mounting bracket, and hot and cold supply lines included
- Solid brass construction in a matte black finish
- 33-11/16 in. spout height with 8-15/16 in. reach clears deep soaking rims
- CSA certified
Specification Table
| Flow rate | 2.25 GPM spout / 1.6 GPM hand shower at 60 psi |
| Maximum published flow | 3.91 GPM spout |
| Valve | Pressure-balancing, ceramic disc cartridge |
| Mounting | Floor mount, single-hole freestanding, rough-in valve included |
| Overall height | 39-1/16 in. |
| Spout height | 33-11/16 in. deck to outlet |
| Spout reach | 8-15/16 in. from body center |
| Hand shower hose | 59 in. |
| Body material | Solid brass |
| Finish | Matte black |
| Certifications | CSA |
| Warranty | One-year limited warranty |
Included Equipment
- Freestanding tub filler body with single-lever handle
- Single-function hand shower with 59 in. hose
- Floor rough-in valve with adjustable mounting bracket
- Hot and cold supply lines
- Pressure-balancing cartridge, factory installed
- Installation guide
Installation Notes
- Rough in the floor valve before finished flooring: confirm joist clearance, blocking, and supply stub locations against the tub position.
- Set the adjustable mounting bracket flush and anchor per the guide; the column must not carry side loads from the hose pull.
- Flush supply lines before installing the cartridge trim to protect the ceramic disc valve from debris.
- Rough-in and final connection should be completed by a qualified, licensed plumber.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: one-year limited warranty
- Replacement cartridges, hand showers, and hoses are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Is the rough-in valve included?
Yes. The floor rough-in valve, adjustable mounting bracket, and hot and cold supply lines ship with the filler.
Will it reach over my tub rim?
The spout outlet sits 33-11/16 in. above the floor with an 8-15/16 in. reach, which clears most freestanding rims of 24 in. or lower. Rim height fit is confirmed during quote review.
Does the hand shower switch back to the spout automatically?
Yes. Pulling the diverter knob under the spout sends water to the hand shower, and the valve returns to spout mode after shutoff.
What keeps the temperature steady?
A pressure-balancing valve compensates when supply pressure suddenly drops, reducing hot and cold shocks while filling.
Documents
- Type Freestanding Tub Filler
- SKU NM-PLB-TF-FS39-MB-MB
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.