Namimera Motion-Activated Single-Handle Pull-Down Kitchen Faucet, 1.8 GPM, Brushed Nickel
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a motion-activated single-hole pull-down faucet with 1.8 GPM flow at 60 psi, a 9.06 in. spout outlet height with 8.38 in. reach, a drip-free ceramic disc cartridge, and battery power with 3-minute auto shutoff, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- 1.8 GPM flow at 60 psi for everyday kitchen duty
- Hands-free motion sensor turns water on and off with a wave
- Automatic 3-minute shutoff protects against water waste
- Battery powered with four AA batteries, no electrician required
- Auto-docking spray head stops flow when it reseats on the spout
- Drip-free ceramic disc cartridge
- Single-hole mount with included escutcheon for 3-hole sinks
- High-arc brass spout with 180 degree swivel in brushed nickel
Specification Table
| Flow rate | 1.8 GPM at 60 psi |
| Activation | Motion sensor plus manual lever; 3-minute auto shutoff |
| Power | Four AA batteries, no hardwiring |
| Valve cartridge | Ceramic disc |
| Spray modes | Stream and spray, two-function head |
| Overall height | 16.63 in. |
| Spout height | 9.06 in. to spout outlet |
| Spout reach | 8.38 in. from base center |
| Mounting | Single-hole deck mount; escutcheon included for 3-hole sinks |
| Body material | Brass |
| Supply connections | 3/8 in. |
| Warranty | 5-year limited warranty |
Included Equipment
- Pull-down faucet body with two-function spray head
- 64 in. pull-down hose, pre-attached
- Battery box and battery bracket hardware
- Escutcheon plate for 3-hole installations
- Mounting hardware and gaskets
- Installation guide
Installation Notes
- Confirm mounting-hole count, hole diameter up to 1.5 in., and deck thickness up to 1.38 in. before cutting.
- Shut off hot and cold supplies and verify stop valves are serviceable before removing the existing faucet.
- Mount the battery box inside the cabinet away from the supply stops and route the sensor data cable clear of the pull-down hose travel.
- Flush supply lines before first use to protect the ceramic cartridge from debris.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: 5-year limited warranty covering parts and service from the original purchase date
- Replacement spray heads, cartridges, and sensor components are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Does it fit a 3-hole sink?
Yes. The faucet mounts in a single hole and ships with an escutcheon plate that covers standard 3-hole layouts.
What happens if the batteries die?
The manual lever continues to control water like a standard faucet. The published specification summary lists battery life of roughly one year on four AA batteries.
Does the water shut off by itself?
Yes. A built-in timer stops flow after 3 minutes, and retracting the spray head into the dock also stops the water.
What should be confirmed before ordering?
Mounting-hole layout, deck thickness, and supply stop condition. These are reviewed with the final finish selection during quote review.
Documents
- Type Touchless Kitchen Faucet
- SKU NM-PLB-KF-PDT18-BN-BN
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.