Namimera Pull-Down Kitchen Faucet with Magnetic Dock Sprayer, 1.8 GPM, Stainless Steel
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a single-handle pull-down kitchen faucet with 1.8 GPM flow at 60 psi, a 14.13 in. overall height, a 9.13 in. spout reach, magnetic wand docking, and a diamond-coated ceramic cartridge, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- 1.8 GPM at 60 psi with aerated stream and spray modes
- Magnetic docking holds the wand precisely in place, no drooping
- Diamond-coated ceramic cartridge for long service life
- 20 in. retractable hose with quick-connect installation
- Wipe-clean rubber nozzles clear mineral buildup with a fingertip
- Integrated PEX supply lines cut connection points under the sink
- Stainless steel and chrome finish options
- ADA compliant; certified to ASME A112.18.1/CSA B125.1
Specification Table
| Flow rate | 1.8 GPM at 60 psi |
| Valve cartridge | Diamond-coated ceramic |
| Docking | Magnetic wand dock |
| Overall height | 14.13 in. with deck plate; 13.63 in. without |
| Spout height | 7.25 in. deck to spout outlet with deck plate |
| Spout reach | 9.13 in. from base center |
| Spout swivel | 360 degrees |
| Hose | 20 in. retractable, quick-connect |
| Mounting | Single hole or 3-hole 8 in.; 10.75 in. deck plate included |
| Max deck thickness | 2.5 in. |
| Supply connections | 3/8 in. O.D. integrated PEX lines |
| Warranty | Lifetime limited on parts and finish |
Included Equipment
- Faucet body with two-function magnetic-dock spray wand
- Optional 10.75 in. deck plate for 3-hole sinks
- Integrated PEX supply lines and mounting hardware
- Installation guide
Installation Notes
- Confirm a single-hole sink or a 3-hole layout with 8 in. centers; holes must be 1.31 to 1.5 in. in diameter.
- Verify deck thickness is 2.5 in. or less and keep 2.5 in. of clearance to the backsplash for handle travel.
- Shut off supplies before removing the existing fixture; the integrated lines terminate in 3/8 in. compression fittings.
- Snap the hose quick-connect onto the wand tube until it clicks, then pull down gently to confirm.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: lifetime limited warranty on parts and finish
- Replacement wands, cartridges, hoses, and aerators are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Will the wand sag over time?
The wand seats on an integrated magnet rather than a friction collar, which keeps it docked and prevents the droop common on worn pull-downs.
Does it fit under low uppers or a window sill?
Overall height is 14.13 in. with the deck plate and 13.63 in. without, one of the lower pull-down profiles. Verify your clearance during quote review.
What finishes are available?
Stainless steel and chrome. A matte black colorway exists in the platform but is not part of this quoting record.
Is the flow rate code-compliant?
The published specification summary lists 1.8 GPM at 60 psi and ASME A112.18.1/CSA B125.1 compliance. Local code requirements should be confirmed during quote review.
Documents
- Type Pull-Down Kitchen Faucet
- SKU NM-PLB-KF-PDM18-SS-SS
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.