Namimera Single-Handle Pull-Out Kitchen Faucet with Two-Function Sprayer, 1.5 GPM, Stainless
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a single-handle pull-out faucet with 1.5 GPM flow at 60 psi, a 7.8 in. spout height with 8.25 in. reach, a 59 in. braided pull-out hose, and a deck plate for 1 to 4-hole sinks, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- 1.5 GPM flow at 60 psi meets common state efficiency codes
- Two-function wand switches between aerated stream and high-power rinse
- Pull-out hose extends 59 in. and retracts smoothly
- Low 7.8 in. spout height clears shallow window sills and shelving
- Fits 1, 2, 3, or 4-hole sinks with the included deck plate
- Spot-resistant stainless finish resists fingerprints and water spots
- ADA compliant lever handle; certified to NSF/ANSI 61 and 372
Specification Table
| Flow rate | 1.5 GPM at 60 psi |
| Valve cartridge | Washerless long-life cartridge |
| Spray modes | Aerated stream and high-power rinse |
| Spout height | 7.8 in. to spout outlet |
| Spout reach | 8.25 in. from base center |
| Spout rotation | 120 degrees |
| Hose | 59 in. braided pull-out hose |
| Mounting | 1 to 4 holes, 1.5 in. diameter, deck plate included |
| Body material | Metal construction |
| Supply connections | 3/8 in. compression |
| Certifications | ADA compliant lever; NSF/ANSI 61 and 372 |
| Warranty | Lifetime limited warranty |
Included Equipment
- Pull-out faucet body with two-function wand
- 59 in. braided pull-out hose, pre-attached
- Deck plate for multi-hole installations
- Flexible supply lines with 3/8 in. compression fittings
- Mounting hardware
- Installation guide
Installation Notes
- Confirm mounting-hole count and 1.5 in. hole diameter against the final quoted configuration before drilling.
- Shut off hot and cold supplies and verify 3/8 in. compression stops are serviceable before removing the existing fixture.
- Deck thickness up to 2.5 in. is supported; verify countertop build-up before install.
- Flush supply lines before first use to protect the cartridge from debris.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: lifetime limited warranty against leaks, drips, and finish defects to the original homeowner; 10-year multifamily and 5-year commercial terms
- Replacement wands, hoses, and cartridges are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Does it fit a 4-hole sink?
Yes. The included deck plate covers 2, 3, or 4-hole layouts with 1.5 in. diameter holes, and the faucet also mounts in a single hole.
Is the flow rate code-compliant?
The published specification summary lists 1.5 GPM at 60 psi, which meets common state efficiency requirements. Local code should be confirmed during quote review.
How is the sprayer different from a pull-down?
The full spout head pulls out toward you on a 59 in. hose, which suits shallow sinks and low-clearance windows better than a tall pull-down arc.
What should be confirmed before ordering?
Hole layout, deck thickness, and supply stop condition, together with the finish selection during quote review.
Documents
- Type Pull-Out Kitchen Faucet
- SKU NM-PLB-KF-PO15-SS-SS
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.