Namimera Push Pop-Up Bathroom Sink Drain with Overflow and Hair Catcher, 1-1/4 in., Chrome
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This plumbing-crew-ready product summary covers a push pop-up lavatory drain with a 1-1/4 in. tailpiece connection, 2.5 in. umbrella cap fitting 1.6 to 2.2 in. sink holes, overflow body, hair catcher, and corrosion-proof plated ABS construction, helping bath programs move from review to release with fewer scope gaps.
Highlights
- Push to open, push to close operation with no lift rod or linkage
- 1-1/4 in. tailpiece connection fits standard lavatory traps
- 2.5 in. umbrella cap covers sink holes from 1.6 to 2.2 in. and hides flange wear
- Overflow body for sinks with an overflow passage
- Removable basket catches hair and jewelry before they reach the trap
- Plated ABS body will not rust, with chrome or oil rubbed bronze finish
- cUPC listed per the manufacturer's published data
- Gasket-sealed installation with no plumber's putty required
Specification Table
| Operation | Push open, push close pop-up with umbrella cap |
| Connection | 1-1/4 in. tailpiece |
| Cap diameter | 2.5 in. |
| Sink hole fit | 1.6 to 2.2 in. diameter |
| Overflow | With overflow body |
| Hair catcher | Removable basket included |
| Overall dimensions | 9 in. H x 3 in. W x 3 in. D |
| Material | Plated ABS |
| Finish | Chrome (oil rubbed bronze available) |
| Certifications | cUPC listed, manufacturer stated |
Included Equipment
- Pop-up drain body with overflow ports
- Threaded 2.5 in. umbrella cap
- Removable hair catcher basket
- Sealing gaskets, washers, and mounting nut
- Installation instructions
Installation Notes
- Confirm the sink has an overflow passage; this body routes overflow water and is intended for sinks with overflow.
- Verify the sink hole falls within the 1.6 to 2.2 in. range and the trap accepts a 1-1/4 in. tailpiece before ordering.
- Assemble with the supplied gaskets only; plumber's putty is not required and can degrade the seal.
- Hand-tighten the mounting nut and check for leaks at the overflow ports during the first fill.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: manufacturer limited warranty on finish and function
- Replacement caps and hair catcher baskets are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Does it fit a sink without an overflow?
This configuration is built for sinks with an overflow. A without-overflow drain body is a separate configuration and can be quoted on request.
What trap size does it connect to?
The tailpiece is 1-1/4 in.; standard lavatory traps and 1-1/2 in. adapters are confirmed during quote review.
Can the finish be changed later?
Yes. The threaded umbrella cap unscrews so a replacement cap in another finish can be fitted without removing the drain body.
Documents
- Type Pop-Up Sink Drain
- SKU NM-PLB-DR-PU-CH-CH
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.