Namimera Single-Handle 1-Spray Shower Faucet with Pressure Balance Valve, 1.75 GPM, Chrome
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a wall-mount single-handle shower faucet with an included pressure-balance rough-in valve, a 2.75 in. single-spray head, a solid forged brass body, and 1.75 GPM WaterSense flow, helping plumbing crews and property teams move from review to release with fewer scope gaps.
Highlights
- Complete unit: trim, single-spray head, arm, flange, and rough-in valve
- Pressure-balancing cartridge holds mix when other fixtures draw water
- Field-adjustable hot limit stop caps handle rotation into the hot zone
- 2.75 in. round head with easy-clean rubber nozzles
- 7 in. escutcheon with etched hot and cold indicators covers most wall openings
- Solid forged brass valve body; all parts serviceable from the front
- 1.75 GPM maximum flow at 80 psi, WaterSense labeled, ADA compliant valve control
- Chrome finish suits maintenance stock standardization
Specification Table
| Valve type | Pressure balance cycle cartridge, adjustable hot limit |
| Valve included | Yes, rough-in valve in box; 1/2 in. male NPT with copper solder option |
| Flow rate | 1.75 GPM at 80 psi |
| Spray settings | 1, full body; easy-clean nozzles |
| Head size | 2.75 in. round |
| Escutcheon | 7 in. plate with H and C indicators |
| Overall height | 13-1/2 in. |
| Body material | Solid forged brass |
| Handle | Single lever, 120 degree rotation |
| Mounting | Wall mount, back-to-back capable |
| Certifications | WaterSense, ADA valve control, ASME A112.18.1/CSA B125.1 |
| Warranty | Lifetime limited, residential; 10 yr multifamily, 5 yr commercial |
Included Equipment
- Pressure-balancing rough-in valve, 1/2 in. male NPT with copper solder option
- Valve trim with lever handle and 7 in. escutcheon
- Single-spray shower head
- Shower arm and flange
- Installation instructions
Installation Notes
- Shut off supplies and confirm 1/2 in. male NPT or sweat connections before setting the valve body.
- Keep the wall opening smaller than the 7 in. escutcheon so the plate fully covers it.
- Set the hot limit stop at commissioning; the handle controls temperature only.
- Rough-in and final connection should be completed by a qualified, licensed plumber.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: lifetime limited parts and finish warranty for residential installations, 10 years multifamily and 5 years other commercial
- Replacement cartridges, handles, and escutcheons are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review.
Frequently Asked Questions
Is the rough-in valve included?
Yes. The complete unit ships with the pressure-balancing rough-in valve, trim, head, arm, and flange.
Can the maximum hot water temperature be limited?
Yes. The cartridge has a field-adjustable rotational limit stop that caps how far the handle turns into the hot zone.
Is the flow rate code-compliant?
The published specification summary lists 1.75 GPM at 80 psi with a WaterSense label and ASME A112.18.1/CSA B125.1 compliance. Local code requirements should be confirmed during quote review.
What should be confirmed before ordering?
Supply connection type at the valve, wall opening size versus the 7 in. escutcheon, and quantity for the program are confirmed during quote review.
Documents
- Type Shower Faucet Set
- SKU NM-PLB-SV-PB1S-CH-CH
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.