Namimera Single-Handle 3-Spray Tub and Shower Faucet with Valve, 1.75 GPM, Polished Chrome
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a wall-mount tub and shower set with an included pressure-balancing valve, ceramic disc cartridge, a 3-spray square head, a 6-3/8 in. reach diverter spout with slip-fit or 1/2 in. NPT connection, and 1.75 GPM WaterSense flow, helping plumbing crews and property teams move from review to release with fewer scope gaps.
Highlights
- Complete tub-shower set: valve, trim, head, arm, flange, and diverter spout
- Pressure-balancing valve with universal 1/2 in. NPT male connections
- 3-spray square head: wide coverage, drenching, and massage
- Ceramic disc valves for long service life
- Diverter tub spout installs slip-fit or threaded
- Single lever handle for on-off and temperature
- 1.75 GPM maximum flow at 45 psi, WaterSense listed
- Polished chrome, brushed nickel, or brushed gold finish
Specification Table
| Valve type | Pressure balance, anti-scald |
| Valve included | Yes, universal 1/2 in. NPT rough-in |
| Flow rate | 1.75 GPM max at 45 psi |
| Spray modes | 3: wide coverage, drenching, massage |
| Cartridge | Ceramic disc |
| Tub spout | Diverter, slip-fit or 1/2 in. NPT |
| Spout reach | 6-3/8 in. |
| Handle | Single lever |
| Finish | Polished chrome (brushed nickel, brushed gold available) |
| Certifications | EPA WaterSense, ASME A112.18.1/CSA B125.1 |
| Warranty | Lifetime limited faucet warranty |
Included Equipment
- Pressure-balancing rough-in valve
- Faceplate trim with lever handle
- 3-spray square shower head
- Shower arm and flange
- Diverter tub spout, slip-fit or 1/2 in. NPT
- Installation instructions
Installation Notes
- For slip-fit spout installs, extend 5/8 in. OD supply tube 4-3/4 in. to 5 in. from the finished wall; for threaded installs use a 1/2 in. nipple per the template.
- Seal the unused valve outlet with the supplied plug for shower-only or tub-only configurations.
- Use thread sealant on threaded connections; flush lines before setting the trim to protect the ceramic cartridge.
- Rough-in and final connection should be completed by a qualified, licensed plumber.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: lifetime limited faucet warranty
- Replacement cartridges, spouts, and trim parts are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Is the rough-in valve included?
Yes. The pressure-balancing valve ships with the trim, head, arm, flange, and diverter spout.
Does the spout fit my existing plumbing?
The diverter spout accepts either a slip-fit 5/8 in. OD tube or a threaded 1/2 in. NPT nipple, covering the common alcove rough-ins.
Is the flow rate code-compliant?
The published specification summary lists 1.75 GPM max at 45 psi with a WaterSense listing. Local code requirements should be confirmed during quote review.
What finishes are available?
Polished chrome, brushed nickel, and brushed gold. The finish for the final order is confirmed during quote review.
Documents
- Type Tub and Shower Faucet Set
- SKU NM-PLB-SV-TS175-PC-PC
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.