Namimera Single-Handle 5-Spray Shower Faucet with Pressure Balance Valve, 1.75 GPM, Brushed Nickel
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a wall-mount shower faucet set with an included pressure-balance rough-in valve, a 5.88 in. five-spray head with pause, 1.75 GPM WaterSense flow, and 1/2 in. connections, helping plumbing crews and property teams move from review to release with fewer scope gaps.
Highlights
- Complete set: valve trim, rough-in valve, shower head, arm, and flange
- Pressure-balancing cartridge holds outlet temperature within plus or minus 3.6 F
- 5 spray settings: full, full plus massage, massage, shampoo rinse, and pause
- Pause setting trickles flow for shaving and lathering, then resumes at temperature
- 5.88 in. spray face on a 13-3/4 in. tall assembly
- Back-to-back installation capable with hot and cold indicators
- 1.75 GPM maximum flow at 80 psi, WaterSense labeled
- Brushed nickel or chrome finish
Specification Table
| Valve type | Pressure balance, anti-scald cycle cartridge |
| Valve included | Yes, universal rough-in valve in box |
| Flow rate | 1.75 GPM at 80 psi |
| Spray settings | 5: full, full plus massage, massage, shampoo rinse, pause |
| Head size | 5.88 in. face diameter |
| Overall height | 13-3/4 in. |
| Connection | 1/2 in.; back-to-back capable |
| Mounting | Wall mount |
| Finish | Brushed nickel (chrome available) |
| Certifications | WaterSense |
| Warranty | Lifetime limited, residential installations |
Included Equipment
- Pressure-balancing universal rough-in valve
- Valve trim with single lever handle and escutcheon
- 5-setting shower head
- Shower arm and flange
- Installation instructions
Installation Notes
- Shut off supplies and verify 1/2 in. rough-in alignment before setting the valve body.
- Set the valve depth to the finished wall using the plasterguard as the gauge.
- Adjust the hot limit stop at commissioning to the maximum hot water the project allows.
- Rough-in and final connection should be completed by a qualified, licensed plumber.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: lifetime limited warranty for residential installations
- Replacement cartridges and trim parts are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review.
Frequently Asked Questions
Is the rough-in valve included?
Yes. The set ships with the universal pressure-balancing rough-in valve, trim, head, arm, and flange in one box.
Can two units share back-to-back walls?
Yes. The valve supports back-to-back installation, which suits multifamily layouts with mirrored baths.
Is the flow rate code-compliant?
The published specification summary lists 1.75 GPM at 80 psi with a WaterSense label. Local code requirements should be confirmed during quote review.
What should be confirmed before ordering?
Rough-in depth, supply type at the valve, and the finish selection are confirmed during quote review.
Documents
- Type Shower Faucet Set
- SKU NM-PLB-SV-PB5S-BN-BN
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.