Namimera Single-Handle Floor-Mount Tub Filler Trim with Hand Shower, Champagne Bronze
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This designer-ready product summary covers a floor-mount tub filler trim with a 37 in. spout height, 8 in. swivel spout reach, an included hand shower with check valves, a pressure balance cartridge, and 1.75 GPM WaterSense flow, helping bath programs move from review to release with fewer scope gaps.
Highlights
- Floor-mount column trim with a 37 in. spout height and 41 in. overall height
- High-arc spout swivels 360 degrees over the tub rim
- Coordinating hand shower with double check valves and a 60 to 82 in. hose
- Single lever handle with a pressure balance cartridge
- Easy-clean rubber spray holes wipe away mineral buildup
- 1.75 GPM at 80 psi, WaterSense listed, ADA compliant
- Trim kit: the matching floor rough-in valve is quoted separately
- Champagne bronze or matte black finish
Specification Table
| Flow rate | 1.75 GPM at 80 psi |
| Valve included | No; matching floor rough-in valve quoted separately |
| Cartridge | Single-function pressure balance |
| Spout height | 37 in. |
| Spout reach | 8 in., 360 degree swivel |
| Overall height | 41 in. |
| Hand shower | Included, double check valves |
| Hose | 60 to 82 in. |
| Mounting | Floor mount, single hole |
| Body material | Brass |
| Certifications | WaterSense, ADA |
| Warranty | Lifetime limited |
Included Equipment
- Floor-mount tub filler trim column
- Coordinating hand shower with hose
- Single lever handle
- Installation instructions
Installation Notes
- This is a trim kit: a dedicated floor rough-in valve is required and is quoted separately; set the valve before finished flooring.
- Confirm joist blocking and supply routing at the planned column location beside the tub.
- Verify hose sweep clearance so the hand shower reaches the full tub without contacting the rim.
- Rough-in and final connection should be completed by a qualified, licensed plumber.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: lifetime limited warranty
- Replacement cartridges, hoses, and hand shower parts are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review.
Frequently Asked Questions
Is the rough-in valve included?
No. This is a trim kit; the matching floor-mount rough-in valve is required and is added to the quote as a companion line.
Does the spout swivel?
Yes. The high-arc spout swivels 360 degrees, which helps position flow over freestanding and claw-foot tubs.
Is the hand shower protected against backflow?
Yes. The hand shower carries double check valves for backflow protection.
What should be confirmed before ordering?
Underfloor access for the rough-in valve, supply routing, tub rim height versus the 37 in. spout, and the finish selection are confirmed during quote review.
Documents
- Type Floor-Mount Tub Filler
- SKU NM-PLB-TF-FM41-CZ-CZ
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.