Namimera Single-Handle Pull-Down Kitchen Faucet with Deck Plate, 1.8 GPM, Brushed Nickel
Reviewed pricing, lead time, freight, and final configuration are confirmed during quote review before order release.
This contractor-ready product summary covers a single-handle pull-down gooseneck kitchen faucet with 1.8 GPM flow, an 8.5 in. spout height, an 8.38 in. spout reach, and a ceramic disc cartridge, helping kitchen and bath programs move from review to release with fewer scope gaps.
Highlights
- 1.8 GPM maximum flow with aerated stream and spray modes
- High-arc gooseneck spout with 180 degree swivel clears tall cookware
- 8.5 in. spout height and 8.38 in. spout reach cover single-bowl sinks
- Washerless ceramic disc cartridge for drip-free service
- Included deck plate adapts 3-hole sinks with 8 in. centers
- Brushed nickel and chrome finish options on the same body
- ADA compliant; cUPC listed with AB1953 lead-free waterways
Specification Table
| Flow rate | 1.8 GPM maximum, CEC listed |
| Valve cartridge | Ceramic disc, washerless |
| Spout type | High-arc gooseneck with pull-down spray head |
| Spray modes | Aerated stream and spray |
| Overall height | 15.5 in. |
| Spout height | 8.5 in. deck to spout outlet |
| Spout reach | 8.38 in. from base center |
| Spout swivel | 180 degrees |
| Mounting | Single hole; deck plate included for 3-hole, 8 in. centers |
| Supply connections | 1/2 in. FIPS |
| Certifications | ADA, cUPC, AB1953 lead-free, CEC |
| Warranty | Limited lifetime warranty |
Included Equipment
- Faucet body with pull-down two-mode spray head
- Deck plate for 3-hole installations
- Lever handle, mounting hardware, and hose weight
- Installation guide
Installation Notes
- Confirm single-hole or 3-hole sink layout with 8 in. centers before ordering; the deck plate is included.
- Shut off hot and cold supplies and relieve line pressure before removing the existing faucet.
- Inlets are 1/2 in. FIPS; verify supply line compatibility or plan adapters during rough-in.
- Flush both lines with the spray head removed after install, then check every joint for leaks.
- Review the final finish selection and accessory bundle during quote review before order release.
Warranty and Support
- Published warranty coverage: limited lifetime warranty on the faucet
- Replacement cartridges, spray heads, and hoses are supported through quote review
- Final warranty registration and coverage documents are confirmed during quote review
Frequently Asked Questions
Will it fit my 3-hole sink?
Yes. The included deck plate covers standard 3-hole layouts with 8 in. centers, and the faucet also installs in a single hole without the plate.
What finishes are available?
Brushed nickel and chrome. The finish for the final order is confirmed during quote review.
Is the flow rate code-compliant?
The published specification summary lists 1.8 GPM maximum and CEC listing. Local code requirements should be confirmed during quote review.
What supply connections do I need?
The inlets are 1/2 in. FIPS. Compatibility with existing stops and any required adapters is confirmed during quote review.
Documents
- Type Pull-Down Kitchen Faucet
- SKU NM-PLB-KF-GN18-BN-BN
Download the available product documents below. If a document is not linked yet, use the SKU during quote review.
Project pricing, lead time, freight routing, and final configuration are confirmed during quote review before order release.
Support and request quote workflows stay available throughout specification and order planning.